Study on Microstructure and Wear Resistance of Ni60-WC Composite Coatings Fabricated by Plasma–Laser Hybrid Cladding
Materials · 14.04.2026 · 19 (8) · 1572
DOI: 10.3390/ma19081572 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.04.2026. Verfasst von Jiacheng Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Hohai University, Nanjing 210024, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The efficient fabrication of high-quality Ni60-WC composite coatings with low dilution and defect density remains a challenge for wear-critical tunneling cutters. In this study, a plasma–laser hybrid cladding (PLHC) strategy was developed to fabricate Ni60-40 wt% WC composite coatings, and their microstructures and properties were systematically compared with those produced by plasma cladding (PC) and laser cladding (LC). The PLHC coatings exhibit a low dilution rate of 10.7% and an ultra-low porosity of 0.2%, indicating improved metallurgical integrity. Microstructural analysis reveals that the hybrid energy input effectively suppresses WC dissolution and promotes a refined, uniformly distributed hard-phase network within the Ni-based matrix. As a result, the PLHC coatings achieve a high average microhardness of 1187.83 HV1.0 and superior wear resistance, with a wear volume of 24.69 × 10−3 mm3 under a 200 N load, representing reductions of 53.6% and 20.9% compared with PC and LC coatings, respectively. These results demonstrate the effectiveness of plasma–laser hybrid cladding in tailoring the microstructure–property relationship of WC-reinforced composite coatings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Hohai University, Nanjing 210024, China.
- CCCC Tunnel Engineering Co., Ltd., Beijing 100102, China.
- College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China.
ORCID-Profile: Jianfeng Zhang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, J., Wang, J., Zhan, Z., Zhao, X., Jiang, H., Min, F., & Zhang, J. (2026). Study on Microstructure and Wear Resistance of Ni60-WC Composite Coatings Fabricated by Plasma–Laser Hybrid Cladding. Materials, 19(8), 1572. https://doi.org/10.3390/ma19081572
Vancouver
Li J, Wang J, Zhan Z, Zhao X, Jiang H, Min F, et al. Study on Microstructure and Wear Resistance of Ni60-WC Composite Coatings Fabricated by Plasma–Laser Hybrid Cladding. Materials. 2026;19(8):1572. doi:10.3390/ma19081572
BibTeX
@article{Li2026,
author = {Li, Jiacheng and Wang, Jinyi and Zhan, Zhaoqing and Zhao, Xiaopeng and Jiang, Haoli and Min, Fanlu and Zhang, Jianfeng},
title = {Study on Microstructure and Wear Resistance of Ni60-WC Composite Coatings Fabricated by Plasma–Laser Hybrid Cladding},
journal = {Materials},
year = {2026},
volume = {19},
number = {8},
pages = {1572},
doi = {10.3390/ma19081572}
}
EUVIMED