EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Annealing Temperature on Interfacial Structure and Thermal Conductivity of Hot-Pressed Copper/Cr-Coated Diamond Composites

Yajing Liu, Xiaohong Chen, Yong Liu, Wei Tian iD, Fanfan Zhou, Honglei Zhou, Yicheng Wang

Materials · 11.04.2026 · 19 (8) · 1534

DOI: 10.3390/ma19081534 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.04.2026. Verfasst von Yajing Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Science, University of Shanghai for Science and Technology, Shanghai 200093, China. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the State Key Laboratory of Advanced Optical Communication Systems and Networks, the National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient heat dissipation is crucial for semiconductor devices; however, conventional thermal management materials often cannot meet practical demands because of inadequate thermal conductivity and mismatched coefficients of thermal expansion with semiconductor materials. In this study, we develop a synergistic process integrating magnetron sputtering and annealing to fabricate a composition-controllable Cr/Cr3C2 composite interlayer on diamond surfaces. By regulating the annealing temperature from 700 to 1100 °C, three key parameters of the Cr/Cr3C2 composite interlayer can be tailored: the thickness varies from ~200 to 800 nm, the Cr/Cr3C2 fraction is adjustable, and the surface roughness ranges from 33.3 to 61.6 nm. In the current research, the sample that was annealed at 900 °C for 2 h exhibited the highest coating uniformity, with carbide coverage exceeding 98% and no discernible porosity. This optimized annealing process produces an interlayer with robust coverage, moderate thickness (~300 nm), and low surface roughness (Ra = 33.3 nm), thereby markedly enhancing interfacial bonding and thermal-transport performance. The resulting composite achieves a maximum thermal conductivity of 605.27 W·m−1·K−1, corresponding to 211% of the experimentally measured value for the uncoated sample. Analyses combining the diffusion mismatch model and experimentation indicate that the enhancement originates from improved phonon spectral matching and increased interfacial adhesion energy. This work provides processing guidance for precise interface engineering in high-thermal-conductivity diamond/copper composites.

Schlagwörter

Stichwörter der Autor:innen

carbidesdiamond/copper compositesinterface designinterfacial thermal conductivitymagnetron sputteringthermal conductivity

Autor:innen und Institutionen

  • College of Science, University of Shanghai for Science and Technology, Shanghai 200093, China.
  • School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China.
  • Co-Innovation Center for Energy Therapy of Tumors, Shanghai 200093, China.

ORCID-Profile: Wei Tian

Förderung

  • the State Key Laboratory of Advanced Optical Communication Systems and Networks
  • the National Natural Science Foundation of China

Zitieren

APA

Liu, Y., Chen, X., Liu, Y., Tian, W., Zhou, F., Zhou, H., & Wang, Y. (2026). Effects of Annealing Temperature on Interfacial Structure and Thermal Conductivity of Hot-Pressed Copper/Cr-Coated Diamond Composites. Materials, 19(8), 1534. https://doi.org/10.3390/ma19081534

Vancouver

Liu Y, Chen X, Liu Y, Tian W, Zhou F, Zhou H, et al. Effects of Annealing Temperature on Interfacial Structure and Thermal Conductivity of Hot-Pressed Copper/Cr-Coated Diamond Composites. Materials. 2026;19(8):1534. doi:10.3390/ma19081534

BibTeX
@article{Liu2026,
  author = {Liu, Yajing and Chen, Xiaohong and Liu, Yong and Tian, Wei and Zhou, Fanfan and Zhou, Honglei and Wang, Yicheng},
  title = {Effects of Annealing Temperature on Interfacial Structure and Thermal Conductivity of Hot-Pressed Copper/Cr-Coated Diamond Composites},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1534},
  doi = {10.3390/ma19081534}
}
Kostenlos starten →