EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Comparative Study of Metallic Iron Production from High-Phosphorus Iron Ores: Carbon-Composite Pellet Direct Reduction–Melting vs. Granular Direct Reduction–Magnetic Separation–Melting

Bin Wang, Jianjun Gao, Feng Wang iD, Yue Yu, Yuanhong Qi

Materials · 2026-04-09 · 19 (8) · 1499

DOI: 10.3390/ma19081499 ↗

At a glance

Journal article in Materials, published online on 2026-04-09. Written by Bin Wang and 4 co-authors. Institution: CISRI Engineering Design Co., Ltd., Beijing 100081, China. Cited 1 times so far (Crossref); 30 references. The full text is freely available (open access, CC BY 4.0). Funded by: the National Key Research & Development Program of China, National Key Research & Development Program of China.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

High-phosphorus iron ore is an abundant yet refractory resource whose industrial exploitation is severely constrained by its elevated phosphorus content. Guided by the ore’s reduction characteristics, two process routes were designed and compared: carbon-composite pellet direct reduction followed by melting separation (CCP-DR–MS) and direct reduction–magnetic separation–melting separation (DR–MS–MS). Systematic experiments under simulated industrial conditions evaluated the metallization degree, dephosphorization efficiency, and smelting performance while clarifying the key factors that govern the differences in phosphorus removal between the two processes. The results show that both routes raised the ore’s metallization degree to above 95% during direct reduction, but the DR–MS–MS route delivered markedly better dephosphorization, achieving a maximum phosphorus removal rate of 89.20%. Although the slags produced by the two processes showed comparable phosphorus capacities, the difference in overall dephosphorization efficiency stemmed from their distinct reduction mechanisms: in DR–MS–MS, metallic iron is generated mainly via CO-mediated reduction, which suppresses phosphorus reduction, whereas in CCP-DR–MS, phosphorus and iron are simultaneously reduced by carbon. Consequently, DR–MS–MS attains superior phosphorus removal.

Subjects

Author keywords

Pdirect reductionhigh-phosphorus iron oresmetallization

Authors and institutions

  • CISRI Engineering Design Co., Ltd., Beijing 100081, China.
  • State Key Laboratory for Advanced Iron and Steel Processes and Products, Central Iron and Steel Research Institute Co., Ltd., Beijing 100081, China.
  • Beijing Steel Research Institute of Hydrometallurgy Technology Co., Ltd., Beijing 100081, China.

ORCID profiles: Feng Wang

Funding

  • the National Key Research & Development Program of China
  • National Key Research & Development Program of China

Cite

APA

Wang, B., Gao, J., Wang, F., Yu, Y., & Qi, Y. (2026). Comparative Study of Metallic Iron Production from High-Phosphorus Iron Ores: Carbon-Composite Pellet Direct Reduction–Melting vs. Granular Direct Reduction–Magnetic Separation–Melting. Materials, 19(8), 1499. https://doi.org/10.3390/ma19081499

Vancouver

Wang B, Gao J, Wang F, Yu Y, Qi Y. Comparative Study of Metallic Iron Production from High-Phosphorus Iron Ores: Carbon-Composite Pellet Direct Reduction–Melting vs. Granular Direct Reduction–Magnetic Separation–Melting. Materials. 2026;19(8):1499. doi:10.3390/ma19081499

BibTeX
@article{Wang2026,
  author = {Wang, Bin and Gao, Jianjun and Wang, Feng and Yu, Yue and Qi, Yuanhong},
  title = {Comparative Study of Metallic Iron Production from High-Phosphorus Iron Ores: Carbon-Composite Pellet Direct Reduction–Melting vs. Granular Direct Reduction–Magnetic Separation–Melting},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1499},
  doi = {10.3390/ma19081499}
}
Start for free →