EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Mechanical Properties of Composite Core Build-Up Materials: A Comparative Study

Emily Mundy, Sanaya V Engineer, Sheila Butler iD, Amin Rizkalla iD, Gildo Coelho Santos Junior iD, Maria Jacinta Moraes Coelho Santos iD

Materials · 2026-04-08 · 19 (8) · 1487

DOI: 10.3390/ma19081487 ↗

At a glance

Journal article in Materials, published online on 2026-04-08. Written by Emily Mundy and 5 co-authors. Institution: Division of Restorative Dentistry, Schulich School of Medicine and Dentistry, Western University, London, ON N6A 3K7, Canada. 46 references. The full text is freely available (open access, CC BY 4.0). Funded by: Schulich Dentistry Research Studentship, Schulich Medicine & Dentistry, Western University.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Objective

To determine the most suitable core build-up materials based on their mechanical and physical properties, different resin based materials were evaluated for flexural strength (FS), flexural modulus (E), modulus of resilience (R), water sorption (WS), and solubility (SO). Materials and Methods: Three dual-cure resins (CosmeCore DC Automix, CCC; Clearfil DC Core Plus, CCP; MultiCore Flow, CMC) and two bulk fill composites (Filtek One Bulk Fill Restorative, BFO; Filtek Bulk Fill Flowable, BFF) were tested, with Filtek Supreme Ultra (FSU) as the control. All tests followed ISO 4049. Beam specimens (25 × 2 × 2 mm, n = 12) were used to determine FS and E after 24 h storage in 37 °C deionized water, using a three-point bending test. Disc specimens (15 × 1 mm, n = 5) were used for WS and SO by measuring mass changes before and after water storage. Data were analysed using one way ANOVA and Tukey post hoc tests (p < 0.05).

Results

CCC exhibited the highest FS and lowest WS. BFF showed the lowest E, while BFO exhibited the highest R. FSU demonstrated the lowest FS and R, along with the highest WS. No significant differences in SO were observed among groups.

Conclusions

The evaluated materials showed considerable variation in mechanical and physical properties. CCC and BFO demonstrated the most favourable performance, suggesting they are the most suitable candidates for core build up procedures among the materials tested.

Subjects

Author keywords

bulk fill compositecore build-up materialsdual-cure resinmechanical propertiessolubilitywater sorption

Authors and institutions

  • Division of Restorative Dentistry, Schulich School of Medicine and Dentistry, Western University, London, ON N6A 3K7, Canada.

ORCID profiles: Sheila Butler, Amin Rizkalla, Gildo Coelho Santos Junior, Maria Jacinta Moraes Coelho Santos

Funding

  • Schulich Dentistry Research Studentship
  • Schulich Medicine & Dentistry, Western University

Cite

APA

Mundy, E., Engineer, S. V., Butler, S., Rizkalla, A., Santos Junior, G. C., & Santos, M. J. M. C. (2026). Mechanical Properties of Composite Core Build-Up Materials: A Comparative Study. Materials, 19(8), 1487. https://doi.org/10.3390/ma19081487

Vancouver

Mundy E, Engineer SV, Butler S, Rizkalla A, Santos Junior GC, Santos MJMC. Mechanical Properties of Composite Core Build-Up Materials: A Comparative Study. Materials. 2026;19(8):1487. doi:10.3390/ma19081487

BibTeX
@article{Mundy2026,
  author = {Mundy, Emily and Engineer, Sanaya V and Butler, Sheila and Rizkalla, Amin and Santos Junior, Gildo Coelho and Santos, Maria Jacinta Moraes Coelho},
  title = {Mechanical Properties of Composite Core Build-Up Materials: A Comparative Study},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1487},
  doi = {10.3390/ma19081487}
}
Start for free →