EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Cooling Rate During β Annealing on the Microstructure and Properties of Ti55531 Titanium Alloy

Xiaoyuan Yuan, Shun Han, Yuxian Cao, Leilei Li, Xinyang Li, Ruming Geng, Simin Lei, Jianguo Wang iD, Chunxu Wang, Yong Li

Materials · 09.04.2026 · 19 (8) · 1486

DOI: 10.3390/ma19081486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.04.2026. Verfasst von Xiaoyuan Yuan und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Special Steels, Central Iron and Steel Research Institute Company Limited, Beijing 100081, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major Program of CISRI Funding.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a high-performance lightweight structural material with superior strength, Ti55531 titanium alloy has been widely adopted in critical load-bearing components such as landing gears and airframe frames in the aerospace sector to achieve significant weight reduction. However, when the tensile strength of Ti55531 exceeds 1250 MPa, the fracture toughness typically falls below 50 MPa·m1/2. In this study, we addressed this challenge by precisely controlling the cooling rate during β annealing heat treatment. Through careful regulation of the cooling rate from the high-temperature β phase region to the aging temperature region, the Widmanstätten structure was successfully introduced into the Ti55531 titanium alloy. The experimental results demonstrate that this microstructure achieves a high tensile strength of 1252 MPa at a cooling rate of 2.5 °C/min, while simultaneously improving the elongation and fracture toughness to 9% and 84 MPa·m1/2, respectively. Microstructural analysis reveals that the basket-weave structure plays a crucial role in maintaining high strength. Meanwhile, the Widmanstätten structure effectively increases the energy required for crack extension by resisting crack propagation and altering the crack propagation path, thus significantly enhancing fracture toughness. These findings offer a promising pathway for overcoming the traditional trade-off between strength and toughness in high-performance titanium alloys.

Schlagwörter

Stichwörter der Autor:innen

Ti55531 titanium alloyWidmanstätten structurecooling ratecrack extensionmechanical properties

Autor:innen und Institutionen

  • Institute of Special Steels, Central Iron and Steel Research Institute Company Limited, Beijing 100081, China.
  • State Key Laboratory of Advanced Special Steel, Beijing 100081, China.
  • School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an 710072, China.

ORCID-Profile: Jianguo Wang

Förderung

  • Major Program of CISRI Funding

Zitieren

APA

Yuan, X., Han, S., Cao, Y., Li, L., Li, X., Geng, R., Lei, S., Wang, J., Wang, C., & Li, Y. (2026). Influence of Cooling Rate During β Annealing on the Microstructure and Properties of Ti55531 Titanium Alloy. Materials, 19(8), 1486. https://doi.org/10.3390/ma19081486

Vancouver

Yuan X, Han S, Cao Y, Li L, Li X, Geng R, et al. Influence of Cooling Rate During β Annealing on the Microstructure and Properties of Ti55531 Titanium Alloy. Materials. 2026;19(8):1486. doi:10.3390/ma19081486

BibTeX
@article{Yuan2026,
  author = {Yuan, Xiaoyuan and Han, Shun and Cao, Yuxian and Li, Leilei and Li, Xinyang and Geng, Ruming and Lei, Simin and Wang, Jianguo and Wang, Chunxu and Li, Yong},
  title = {Influence of Cooling Rate During β Annealing on the Microstructure and Properties of Ti55531 Titanium Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1486},
  doi = {10.3390/ma19081486}
}
Kostenlos starten →