Ultrasonic-Based Quantification and Process Parameter Optimization of Anisotropy and Heterogeneity in WAAM 2319 Aluminum Alloy
Materials · 03.04.2026 · 19 (7) · 1433
DOI: 10.3390/ma19071433 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.04.2026. Verfasst von Chao Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: AECC Huanan Aviation Powerplant Research Institute, Zhuzhou 412002, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Challenge Project.
Abstract (Originalsprache)
Wire and arc additive manufacturing (WAAM) offers high deposition efficiency for large-scale aluminum components; however, layer-by-layer thermal cycling often induces microstructural anisotropy and spatial heterogeneity, which compromise structural reliability. In this study, an ultrasonic-based quantitative framework is proposed to evaluate and optimize anisotropy and heterogeneity in WAAM 2319 aluminum alloy. Nine blocks were fabricated using an orthogonal design with three key process parameters: torch travel speed, arc current, and shielding gas flow rate. Ultrasonic velocity and attenuation were employed to construct anisotropy and heterogeneity indicators. Results show that velocity-based anisotropy remains below 0.53%, indicating nearly isotropic elastic stiffness, whereas attenuation-based anisotropy reaches up to 76%, revealing pronounced direction-dependent microstructural and porosity features. Metallographic analysis confirms that grain morphology variation and interlayer porosity jointly govern attenuation responses. Response surface surrogate models were established to correlate ultrasonic indicators with process parameters, and both single- and multi-objective optimizations were performed within the feasible process window. The proposed framework provides a non-destructive, volumetric approach for microstructure-informed process parameter optimization in WAAM aluminum alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- AECC Huanan Aviation Powerplant Research Institute, Zhuzhou 412002, China.
- Graduate School of China Academy of Engineering Physics, Beijing 100191, China.
- AVIC Manufacturing Technology Institute, Beijing 100024, China.
- School of Reliability and Systems Engineering, Beihang University, Beijing 100193, China.
Förderung
- Science Challenge Project
Zitieren
APA
Li, C., Liu, H., Wang, X., He, J., & Guan, X. (2026). Ultrasonic-Based Quantification and Process Parameter Optimization of Anisotropy and Heterogeneity in WAAM 2319 Aluminum Alloy. Materials, 19(7), 1433. https://doi.org/10.3390/ma19071433
Vancouver
Li C, Liu H, Wang X, He J, Guan X. Ultrasonic-Based Quantification and Process Parameter Optimization of Anisotropy and Heterogeneity in WAAM 2319 Aluminum Alloy. Materials. 2026;19(7):1433. doi:10.3390/ma19071433
BibTeX
@article{Li2026,
author = {Li, Chao and Liu, Hanlei and Wang, Xinyan and He, Jingjing and Guan, Xuefei},
title = {Ultrasonic-Based Quantification and Process Parameter Optimization of Anisotropy and Heterogeneity in WAAM 2319 Aluminum Alloy},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1433},
doi = {10.3390/ma19071433}
}
EUVIMED