EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Wire Directed Energy Deposition of 5356 Aluminum Alloy: Process Parameter Optimization and Porosity Prediction

Xiangfei Zhang, Yujia Mei, Huomu Yang, Shouhuan Zhou

Materials · 12.03.2026 · 19 (6) · 1104

DOI: 10.3390/ma19061104 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.03.2026. Verfasst von Xiangfei Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Electronics and Information Engineering, Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser wire directed energy deposition (LWDED) has garnered significant attention for the fabrication of large metallic components. However, the complex coupling effects among its process parameters pose challenges for porosity control. Optimizing parameter combinations to effectively minimize porosity is therefore critical to the broader adoption of this technology. In this study, systematic experiments and modeling were conducted to optimize the LWDED process parameters and predict porosity. First, single-factor and orthogonal experiments were performed to evaluate the individual effects of laser power, scanning speed, wire feeding speed, and air pressure on porosity. Subsequently, range analysis and analysis of variance were employed to determine the influence of each parameter and the significance of their interactions. Four machine learning models—SVR, RF, GPR, and XGBoost—were then trained and compared. Among them, the SVR model exhibited the best predictive performance, achieving an R2 of 0.8960, an RMSE of 0.19, and an MAE of 0.15, outperforming the other three models. Based on this, the SVR model was further utilized to establish the mapping between process parameters and porosity. Contour maps and three-dimensional surface plots were generated to visualize porosity variation patterns under interacting parameters. Validation experiments showed that the maximum relative error between model predictions and experimental measurements was 0.514%, with an average error of 0.251%. This study provides a reliable reference for selecting low-porosity parameter combinations in the LWDED fabrication of 5356 aluminum alloy components.

Schlagwörter

Stichwörter der Autor:innen

5356 aluminum alloylaser wire directional energy depositionmachine learningporosity

Autor:innen und Institutionen

  • College of Electronics and Information Engineering, Sichuan University, Chengdu 610065, China.

Zitieren

APA

Zhang, X., Mei, Y., Yang, H., & Zhou, S. (2026). Laser Wire Directed Energy Deposition of 5356 Aluminum Alloy: Process Parameter Optimization and Porosity Prediction. Materials, 19(6), 1104. https://doi.org/10.3390/ma19061104

Vancouver

Zhang X, Mei Y, Yang H, Zhou S. Laser Wire Directed Energy Deposition of 5356 Aluminum Alloy: Process Parameter Optimization and Porosity Prediction. Materials. 2026;19(6):1104. doi:10.3390/ma19061104

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiangfei and Mei, Yujia and Yang, Huomu and Zhou, Shouhuan},
  title = {Laser Wire Directed Energy Deposition of 5356 Aluminum Alloy: Process Parameter Optimization and Porosity Prediction},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1104},
  doi = {10.3390/ma19061104}
}
Kostenlos starten →