EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Texture Variation Mechanism of Ti-3Al-2.5V Titanium Alloy Tube During Cold-Rolling Process

Huiyan Ge, Yumeng Luo iD, Boya Wang, Xiaoyun Song, Wenjun Ye, Yang Yu iD, Yanfeng Li, Songxiao Hui

Materials · 24.03.2026 · 19 (7) · 1282

DOI: 10.3390/ma19071282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2026. Verfasst von Huiyan Ge und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Nonferrous Structural Materials, China GRINM Group Co., Ltd., Beijing 100088, China. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the mechanism of texture formation during the cold rolling of Ti-3Al-2.5V tubes for aerospace hydraulic systems, this study examines the microstructure at various locations of two deformation cones with ‘Q’ ratios of 1.055 and 1.300, respectively, in a single cold-rolling pass, revealing their continuous texture evolution. The results indicate that the cold-rolling texture primarily forms during the sinking section. A higher ‘Q’ ratio leads to a stronger tendency for the c-axis of grains to align parallel to the radial direction of the tube, resulting in enhanced radial texture intensity. Beyond influencing texture through dislocation slip, a higher ‘Q’ ratio also elevates the Schmid factor for {101-2} twinning. This twinning mechanism primarily forms the radial texture by altering the stress state. Consequently, this change not only facilitates twin activation but also modifies the rotation direction of grains during the twinning process. Compared to the cone with a ‘Q’ ratio of 1.055, the deformation cone with a ‘Q’ ratio of 1.300 contains a greater number of twins oriented along //RD, leading to a stronger radial texture in the tube.

Schlagwörter

Stichwörter der Autor:innen

Ti-3Al-2.5V alloytexture variation mechanism‘Q’ ratio

Autor:innen und Institutionen

  • State Key Laboratory of Nonferrous Structural Materials, China GRINM Group Co., Ltd., Beijing 100088, China.
  • GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China.
  • General Research Institute for Nonferrous Metals, Beijing 100088, China.
  • GRINM (Guangdong) Institute for Advanced Materials and Technology, Foshan 528051, China.

ORCID-Profile: Yumeng Luo, Yang Yu

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Ge, H., Luo, Y., Wang, B., Song, X., Ye, W., Yu, Y., Li, Y., & Hui, S. (2026). Research on Texture Variation Mechanism of Ti-3Al-2.5V Titanium Alloy Tube During Cold-Rolling Process. Materials, 19(7), 1282. https://doi.org/10.3390/ma19071282

Vancouver

Ge H, Luo Y, Wang B, Song X, Ye W, Yu Y, et al. Research on Texture Variation Mechanism of Ti-3Al-2.5V Titanium Alloy Tube During Cold-Rolling Process. Materials. 2026;19(7):1282. doi:10.3390/ma19071282

BibTeX
@article{Ge2026,
  author = {Ge, Huiyan and Luo, Yumeng and Wang, Boya and Song, Xiaoyun and Ye, Wenjun and Yu, Yang and Li, Yanfeng and Hui, Songxiao},
  title = {Research on Texture Variation Mechanism of Ti-3Al-2.5V Titanium Alloy Tube During Cold-Rolling Process},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1282},
  doi = {10.3390/ma19071282}
}
Kostenlos starten →