EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experiments and Crystal Plasticity Finite Element Simulations of Texture Development during Cold Rolling in a Ti-15V-3Cr-3Sn-3Al Alloy

Diksha Mahadule, Murat Demiral, Hasan Mulki, Rajesh K. Khatirkar

Crystals · 12.01.2023 · 13 (1) · 137

DOI: 10.3390/cryst13010137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 12.01.2023. Verfasst von Diksha Mahadule und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Board (SERB).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of deformation on the evolution of crystallographic texture in a Ti-15V-3Cr-3Sn-3Al (Ti-15333) alloy after unidirectional cold rolling was studied experimentally and numerically in the present investigation. An optical microscope (OM) and scanning electron microscope (SEM) were used to study the microstructures, while the crystallographic texture after cold rolling was studied with X-ray diffraction. The rolling process (deformation) was simulated with PRISMS-plasticity, open-source crystal plasticity software. Micro-indentations were performed on the initial solution-annealed sample with an equiaxed grain structure. The experimentally obtained load–displacement curve for a particular grain (orientation-φ1, Φ, φ2 = 325.2°, 18.0°, 66.2° (Bunge notation)) was compared with the crystal plasticity finite element method (FEM)-simulated load–displacement curve to obtain the calibration parameters. The obtained parameters, along with the experimental stress–strain curve, were used to recalibrate the PRISMS-plasticity software for the rolling simulations of the Ti-15333 alloy. It was observed that the γ-(normal direction, ND//) and α-(rolling direction, RD//) fibers strengthened with cold rolling, experimentally as well as numerically. The simulated orientation distribution functions (ODFs) matched reasonably well with those obtained from the experiments. The average values of von Mises stress and von Mises strain increased with an increase in deformation.

Förderung

  • Science and Engineering Research Board (SERB)

Zitieren

APA

Mahadule, D., Demiral, M., Mulki, H., & Khatirkar, R. K. (2023). Experiments and Crystal Plasticity Finite Element Simulations of Texture Development during Cold Rolling in a Ti-15V-3Cr-3Sn-3Al Alloy. Crystals, 13(1), 137. https://doi.org/10.3390/cryst13010137

Vancouver

Mahadule D, Demiral M, Mulki H, Khatirkar RK. Experiments and Crystal Plasticity Finite Element Simulations of Texture Development during Cold Rolling in a Ti-15V-3Cr-3Sn-3Al Alloy. Crystals. 2023;13(1):137. doi:10.3390/cryst13010137

BibTeX
@article{Mahadule2023,
  author = {Mahadule, Diksha and Demiral, Murat and Mulki, Hasan and Khatirkar, Rajesh K.},
  title = {Experiments and Crystal Plasticity Finite Element Simulations of Texture Development during Cold Rolling in a Ti-15V-3Cr-3Sn-3Al Alloy},
  journal = {Crystals},
  year = {2023},
  volume = {13},
  number = {1},
  pages = {137},
  doi = {10.3390/cryst13010137}
}
Kostenlos starten →