Effects of Controlled Oxygen Partial Pressure on Arc Dynamics and Material Erosion in a Pantograph–Catenary System
Materials · 20.03.2026 · 19 (6) · 1234
DOI: 10.3390/ma19061234 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.03.2026. Verfasst von Bingquan Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Motivated by altitude-induced fluctuations in oxygen partial pressure (pO2) and their impacts on PCS off-line arc motion and erosion response, this study proposes a comparative experimental approach featuring single-variable control under constant total pressure and coordinated multi-source electrical-signal observation. A reciprocating current-carrying arc-generation rig was established, in which pO2 was equivalently regulated via a constant-pressure gas substitution and mixing approach. High-speed imaging–based quantitative vision analysis was integrated with synchronized voltage–current measurements to evaluate the net effects of five O2 volumetric fraction levels (6, 11, 14, 17, and 21 vol%) under a DC supply of 120 V/25 A on arc dynamics, electrochemical processes, and contact pair erosion. Based on repeated-test results, the 14 vol% case exhibited the poorest stability (maximum fluctuation coefficient 20.306%), whereas the 17 vol% case showed the lowest current-carrying efficiency (minimum 56.070%) together with the most severe erosion damage. Moreover, with increasing pO2, the erosion morphology evolved in a staged manner, transitioning from localized central ablation accompanied by melt-related traces to adhesive wear-induced delamination, and ultimately to electrochemical oxidative wear. Overall, pO2 imposes a pronounced non-monotonic “window effect” on arc stability and erosion, providing key evidence for PCS structural optimization and risk assessment in open operating environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China.
- Department of Railway Rolling Stock, Liaoning Railway Vocational and Technical College, Jinzhou 121000, China.
ORCID-Profile: Bingquan Li, Zhaoyu Ku
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, B., Ku, Z., Xing, X., Ji, R., & Dong, H. (2026). Effects of Controlled Oxygen Partial Pressure on Arc Dynamics and Material Erosion in a Pantograph–Catenary System. Materials, 19(6), 1234. https://doi.org/10.3390/ma19061234
Vancouver
Li B, Ku Z, Xing X, Ji R, Dong H. Effects of Controlled Oxygen Partial Pressure on Arc Dynamics and Material Erosion in a Pantograph–Catenary System. Materials. 2026;19(6):1234. doi:10.3390/ma19061234
BibTeX
@article{Li2026,
author = {Li, Bingquan and Ku, Zhaoyu and Xing, Xuanyu and Ji, Ran and Dong, Huajun},
title = {Effects of Controlled Oxygen Partial Pressure on Arc Dynamics and Material Erosion in a Pantograph–Catenary System},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1234},
doi = {10.3390/ma19061234}
}
EUVIMED