EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing

Paweł Turek iD, Grzegorz Budzik iD, Łukasz Przeszłowski iD, Anna Bazan iD, Bogumił Lewandowski iD, Paweł Pakla, Tomasz Dziubek iD, Robert Brodowski iD, Małgorzata Zaborniak iD, Jan Frańczak iD, Michał Bałuszyński iD

Materials · 19.03.2026 · 19 (6) · 1208

DOI: 10.3390/ma19061208 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.03.2026. Verfasst von Paweł Turek und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing Techniques and Automation, Rzeszów University of Technology, 35-959 Rzeszów, Poland. Die Arbeit nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise orbital floor reconstruction requires personalised surgical templates that combine high geometric fidelity with manufacturing efficiency. This study presents and validates the TARMM procedure, developed to optimise the production of polylactide (PLA) templates. A key innovation is the integration of advanced machine learning algorithms (Random Forest) and Mitchell–Netravali interpolation to reduce medical reconstruction artefacts, as well as the implementation of Material Extrusion (MEX) technology with Variable Layer Height (VLH). This strategy minimises the stair-step effect on complex anatomical curvatures while maintaining high process throughput. The results demonstrate that the TARMM procedure ensures a geometric error within ±0.1 mm. A strong linear correlation (r = 0.99) was found between layer height and surface roughness (Sa), indicating that a 0.07 mm layer in critical areas significantly improves template morphology and facilitates the contouring of titanium meshes. The clinical validation across 21 cases confirmed a 30 min reduction in surgical preparation time. The developed method serves as a low-cost, high-precision alternative to photopolymerization technologies, contributing to modern 3D printing applications in maxillofacial surgery.

Schlagwörter

Stichwörter der Autor:innen

PLA materialTARMM procedureadditive manufacturinggeometrical accuracyorbital floorsurface roughnesssurgical template

Autor:innen und Institutionen

  • Department of Manufacturing Techniques and Automation, Rzeszów University of Technology, 35-959 Rzeszów, Poland.
  • Department of Mechanical Engineering, Rzeszów University of Technology, 35-959 Rzeszów, Poland.
  • Department of Cranio-Maxillofacial Surgery, University of Rzeszów, 35-315 Rzeszów, Poland.
  • Department of Maxillofacial Surgery, University Clinical Hospital Fryderyk Chopin in Rzeszów, 35-055 Rzeszów, Poland.

ORCID-Profile: Paweł Turek, Grzegorz Budzik, Łukasz Przeszłowski, Anna Bazan, Bogumił Lewandowski, Tomasz Dziubek, Robert Brodowski, Małgorzata Zaborniak, Jan Frańczak, Michał Bałuszyński

Zitieren

APA

Turek, P., Budzik, G., Przeszłowski, Ł., Bazan, A., Lewandowski, B., Pakla, P., Dziubek, T., Brodowski, R., Zaborniak, M., Frańczak, J., & Bałuszyński, M. (2026). Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing. Materials, 19(6), 1208. https://doi.org/10.3390/ma19061208

Vancouver

Turek P, Budzik G, Przeszłowski Ł, Bazan A, Lewandowski B, Pakla P, et al. Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing. Materials. 2026;19(6):1208. doi:10.3390/ma19061208

BibTeX
@article{Turek2026,
  author = {Turek, Paweł and Budzik, Grzegorz and Przeszłowski, Łukasz and Bazan, Anna and Lewandowski, Bogumił and Pakla, Paweł and Dziubek, Tomasz and Brodowski, Robert and Zaborniak, Małgorzata and Frańczak, Jan and Bałuszyński, Michał},
  title = {Advanced Manufacturing of PLA Surgical Templates for Orbital Floor Geometry: Optimizing Fidelity and Surface Morphology via Variable Layer Height MEX 3D Printing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1208},
  doi = {10.3390/ma19061208}
}
Kostenlos starten →