Experimental Investigation on the Flexural Performance of CFRP-Reinforced Timber Composite Beams
Materials · 18.03.2026 · 19 (6) · 1196
DOI: 10.3390/ma19061196 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2026. Verfasst von Hao Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, China Scholarship Council.
Abstract (Originalsprache)
The development of lightweight, high-strength structural systems is a persistent pursuit in modern civil engineering. This paper presents an experimental study on a novel hybrid beam concept in which a sawn timber core is fully bonded with an externally applied Carbon Fiber-Reinforced Polymer (CFRP) laminate, fabricated through a controlled hand lay-up process. The design seeks to exploit the complementary characteristics of the two materials: timber provides compressive resistance and serves as a permanent formwork, while the CFRP carries tensile stresses with high efficiency. Fourteen hybrid beams, with variations in the number of longitudinal CFRP layers (one, two or, three), the presence or absence of longitudinal CFRP layers bonded along the top and bottom surfaces, and the presence or absence of circumferential wrapping in the pure bending region, were tested under four-point bending alongside two solid timber control beams. The results demonstrate that circumferential wrapping is a critical design detail. Wrapped beams consistently failed by tensile rupture of the CFRP—the intended failure mode—and exhibited ultimate moments 15–20% higher than their unwrapped counterparts. Beams with two longitudinal CFRP layers offered the most favorable balance between strength enhancement and material efficiency; adding a third layer shifted the failure mode to crushing of the timber core, indicating a core-limited condition. All hybrid beams showed pronounced linear-elastic behavior up to sudden brittle failure, with performance variability attributable to the inherent inhomogeneity of wood and the sensitivity of the hand lay-up process. The study provides quantitative data and mechanistic insights that support the design and application of bonded CFRP–timber hybrid beams as efficient structural members.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Civil Engineering, Nanjing Tech University, Nanjing 211816, China.
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
- Department of Civil Engineering and Architecture, Anhui University of Technology, Maanshan 243099, China.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- China Scholarship Council
- 2024 Postgraduate Research & Practice Innovation Program of Jiangsu Province
- Cultivation Program for the Excellent Doctoral Dissertation of Nanjing Tech University
Zitieren
APA
Zhang, H., Cao, Y., Fang, H., Xie, H., & Chen, C. (2026). Experimental Investigation on the Flexural Performance of CFRP-Reinforced Timber Composite Beams. Materials, 19(6), 1196. https://doi.org/10.3390/ma19061196
Vancouver
Zhang H, Cao Y, Fang H, Xie H, Chen C. Experimental Investigation on the Flexural Performance of CFRP-Reinforced Timber Composite Beams. Materials. 2026;19(6):1196. doi:10.3390/ma19061196
BibTeX
@article{Zhang2026,
author = {Zhang, Hao and Cao, Yan and Fang, Hai and Xie, Honglei and Chen, Chen},
title = {Experimental Investigation on the Flexural Performance of CFRP-Reinforced Timber Composite Beams},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1196},
doi = {10.3390/ma19061196}
}
EUVIMED