Microstructural and Mechanical Characterization of Ultra-Pure Aluminum for Low-Amplitude-Vibration Cryogenic Applications
Materials · 18.03.2026 · 19 (6) · 1195
DOI: 10.3390/ma19061195 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2026. Verfasst von Mirko Pigato und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering (DII), Università degli Studi di Padova, 35131 Padova, Italy. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Programma Nazionale di Ricerca e Progetti di Rilevante Interesse Nazionale, Piano Nazionale di Ripresa e Resilienza.
Abstract (Originalsprache)
In fundamental physics, sensors operating below liquid helium temperatures are highly vulnerable to vibrations, which can affect the sensitivity, for example, of high-performance particle detectors. Pulse-tube refrigerators, while generating vibrations lower than those of conventional systems, may still introduce several disturbances. Hence, flexible thermal connections are a commonly used mechanical solution to mitigate these undesirable effects. Among the materials that can be used, ultra-high-purity aluminum (UHP-Al) has attracted the attention for low-amplitude-vibration cryogenic applications, including gravitational wave interferometry, quantum information systems, precision space instrumentation, and cryogenic resonators. Thus, the aim of the paper is the characterization of the mechanical and microstructure properties of three UHP-Als (i.e., 5N—99.999 wt%, 5N5—99.9995 wt% and 6N—99.9999 wt%) intended for the production of thermal flexible connections with low stiffness, specifically designed to reduce vibration transmission in cryogenic environments. Mechanical properties were evaluated through standard tensile tests from room (+25 °C) to low temperature (i.e., −150 °C), providing insights into yield strength, ultimate tensile strength, elongation and elastic modulus. In addition, the dynamic elastic modulus of material loads, at cryogenic conditions (i.e., about −180 °C), was determined by measuring the natural resonance frequency, thereby assessing the material’s response to vibrational. Moreover, an extensive microstructural analysis was conducted using electron backscatter diffraction and x-ray diffraction. The correlation between the observed microstructure and the elastic properties was systematically examined. The results underscore the pivotal role of microstructural characteristics in dictating the elastic behavior of UHP Als. Eventually, the analysis provides valuable guidelines for the materials employment inside cryogenic systems, where severe vibration control is critical to maintain high operational performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial Engineering (DII), Università degli Studi di Padova, 35131 Padova, Italy.
- Institute of Condensed Matter Chemistry and Energy Technologies (ICMATE), National Research Council of Italy, 35127 Padova, Italy.
- Gran Sasso National Laboratory (LNGS), National Institute of Nuclear Physics (INFN), Assergi, 67100 L'Aquila, Italy.
- Department of Industrial and Information Engineering and Economics (DIIIE), Università degli Studi dell'Aquila, Monteluco di Roio, 67100 L'Aquila, Italy.
ORCID-Profile: Mirko Pigato, Filippo Agresti, Alberto Benato, Irene Calliari, Daniele Cortis, Serena D'Eramo, Shihong Fu, Cristina Giancarli, Luca Pezzato, Andrea Zambon, Antonio D'Addabbo
Förderung
- Programma Nazionale di Ricerca e Progetti di Rilevante Interesse Nazionale
- Piano Nazionale di Ripresa e Resilienza
Zitieren
APA
Pigato, M., Agresti, F., Benato, A., Bucci, C., Calliari, I., Cortis, D., D'Eramo, S., Fu, S., Giancarli, C., Pezzato, L., Zambon, A., & D'Addabbo, A. (2026). Microstructural and Mechanical Characterization of Ultra-Pure Aluminum for Low-Amplitude-Vibration Cryogenic Applications. Materials, 19(6), 1195. https://doi.org/10.3390/ma19061195
Vancouver
Pigato M, Agresti F, Benato A, Bucci C, Calliari I, Cortis D, et al. Microstructural and Mechanical Characterization of Ultra-Pure Aluminum for Low-Amplitude-Vibration Cryogenic Applications. Materials. 2026;19(6):1195. doi:10.3390/ma19061195
BibTeX
@article{Pigato2026,
author = {Pigato, Mirko and Agresti, Filippo and Benato, Alberto and Bucci, Carlo and Calliari, Irene and Cortis, Daniele and D'Eramo, Serena and Fu, Shihong and Giancarli, Cristina and Pezzato, Luca and Zambon, Andrea and D'Addabbo, Antonio},
title = {Microstructural and Mechanical Characterization of Ultra-Pure Aluminum for Low-Amplitude-Vibration Cryogenic Applications},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1195},
doi = {10.3390/ma19061195}
}
EUVIMED