Microstructural and Mechanical Characterization of Corroded Aluminum Wires from ACSR Strand
Corrosion and Materials Degradation · 17.06.2025 · 6 (2) · 25
DOI: 10.3390/cmd6020025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Corrosion and Materials Degradation, online erschienen am 17.06.2025. Verfasst von Laurent Gaillet und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LIA ECOMAT Université Gustave Eiffel-Université de Sherbrooke, Hydro-Québec, RTE (France), NSERC (Canada) and InnovÉÉ (Québec).
Abstract (Originalsprache)
Aluminum Conductors Steel-Reinforced (ACSR) conductors are typically used in overhead transmission lines. Corrosion is an important degradation mechanisms that might affect the lifetime of this essential electricity network component. Considering the complexity of conductors, it is difficult to predict the damage of these conductors in corrosive environments. The objective of this paper is to evaluate the effect of grease and conductor geometry on the mechanical properties of aluminum strand composing the envelope of ASCR conductors. Thus, ACSR wires and strands have been evaluated in corrosion by the mean of accelerated corrosion tests. Tensile, fatigue and torsion test results are presented to examine the effect of corrosion on aluminum strands. The influence of corrosion on mechanical characteristics is established by a decrease in ductility, maximum elongation and tensile strength for the longest exposition (336 days). This significant reduction in the internal layer of ungreased wires confirms the importance of the galvanic corrosion mechanism of aluminum wires. This evolution concerns only aluminum wires of non-greased conductors, confirming the crucial role of grease as protection against corrosion.
Förderung
- LIA ECOMAT Université Gustave Eiffel-Université de Sherbrooke, Hydro-Québec, RTE (France), NSERC (Canada) and InnovÉÉ (Québec)
Zitieren
APA
Gaillet, L., Rondineau, A., Langlois, S., Demers, M., & Dieng, L. (2025). Microstructural and Mechanical Characterization of Corroded Aluminum Wires from ACSR Strand. Corrosion and Materials Degradation, 6(2), 25. https://doi.org/10.3390/cmd6020025
Vancouver
Gaillet L, Rondineau A, Langlois S, Demers M, Dieng L. Microstructural and Mechanical Characterization of Corroded Aluminum Wires from ACSR Strand. Corrosion and Materials Degradation. 2025;6(2):25. doi:10.3390/cmd6020025
BibTeX
@article{Gaillet2025,
author = {Gaillet, Laurent and Rondineau, Alan and Langlois, Sébastien and Demers, Marc and Dieng, Lamine},
title = {Microstructural and Mechanical Characterization of Corroded Aluminum Wires from ACSR Strand},
journal = {Corrosion and Materials Degradation},
year = {2025},
volume = {6},
number = {2},
pages = {25},
doi = {10.3390/cmd6020025}
}
EUVIMED