EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement

Chengtao Peng, Siqi Wu iD, Xinming Wang, Chen Zhang, Jing Sun, Jinlong Song iD

Materials · 13.03.2026 · 19 (6) · 1127

DOI: 10.3390/ma19061127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.03.2026. Verfasst von Chengtao Peng und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liao Ning Revitalization Talents Program, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

GH3536 superalloy is widely used in the high-temperature components of aerospace applications for its excellent high-temperature strength and corrosion resistance. However, under such a harsh environment, surface defects can make the superalloy prone to corrosion and fatigue fractures. Therefore, it is important to eliminate surface defects through polishing. However, the existing polishing methods usually suffer from some issues such as surface integrity damage, low efficiency, and poor environmental sustainability. More importantly, these methods fail to account for the requirement of surface roughness below 0.05 μm in some high-precision aerospace components. Herein, the plasma electrolytic polishing (PEP) of GH3536 superalloy is systematically investigated and optimized through single-factor experiments and response surface methodology (RSM). A minimum surface roughness Ra of 0.044 μm with a mirror-like surface was achieved at a voltage of 303.8 V, electrolyte temperature of 66.2 °C, polishing time of 5 min, and submersion depth of 7.5 cm. At the same optimized condition, the material removal rate was 59.12 mg·min−1. After polishing, the surface composition of GH3536 superalloy varied negligibly, while its corrosion resistance improved markedly, with a 53.72% increase in polarization resistance and a 43.46% decrease in corrosion current density. Meanwhile, the microhardness slightly decreased due to the removal of the work-hardened layer and the compressive residual stress exhibited a more uniform distribution across the surface, contributing to improved near-surface mechanical stability. This study establishes an optimized PEP parameter for improving the surface quality of GH3536 superalloy, offering a practical method for the precision finishing of aerospace-grade superalloy components.

Schlagwörter

Stichwörter der Autor:innen

GH3536 superalloylow roughnessplasma electrolytic polishing

Autor:innen und Institutionen

  • State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China.
  • Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian 116024, China.
  • School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Siqi Wu, Jinlong Song

Förderung

  • Liao Ning Revitalization Talents Program
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Peng, C., Wu, S., Wang, X., Zhang, C., Sun, J., & Song, J. (2026). Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement. Materials, 19(6), 1127. https://doi.org/10.3390/ma19061127

Vancouver

Peng C, Wu S, Wang X, Zhang C, Sun J, Song J. Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement. Materials. 2026;19(6):1127. doi:10.3390/ma19061127

BibTeX
@article{Peng2026,
  author = {Peng, Chengtao and Wu, Siqi and Wang, Xinming and Zhang, Chen and Sun, Jing and Song, Jinlong},
  title = {Precision Plasma Electrolytic Polishing of GH3536 Superalloy for Effective Surface Performance Improvement},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1127},
  doi = {10.3390/ma19061127}
}
Kostenlos starten →