ASME-Based Structural Assessment of Head–Shell Junctions in Pressurized Railway Tank Wagons
Materials · 13.03.2026 · 19 (6) · 1125
DOI: 10.3390/ma19061125 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.03.2026. Verfasst von Costin Nicolae Ilincă und 8 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, 100680 Ploiesti, Romania. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Petroleum & Gas University of Ploieşti, Petroleum-Gas University of Ploiesti, Material Characteristics on the Operational Behavior of Shell Structures.
Abstract (Originalsprache)
This study presents an ASME-based structural assessment of the head–shell junction in a 60 m3 pressurized railway tank wagon subjected to an internal pressure of 0.45 MPa, combining classical shell theory with finite element analysis (FEA) in accordance with ASME Section VIII Division 2 stress categorization and linearization procedures. An analytical model based on the moment theory of shells of revolution was developed to describe displacement and rotation compatibility at the ellipsoidal head–cylindrical shell junction, allowing for the determination of contour interaction loads governing membrane–bending coupling in the discontinuity region. The calculated contour loads (Q0 = 795 N/mm, M0 = 13,350 N·mm/mm) indicate localized membrane–bending interactions caused by geometric discontinuity. Finite element simulations using axisymmetric (2D) and full 3D models were evaluated through the ASME VIII-2 stress linearization procedure, enabling comparison between analytical predictions and numerical results. The maximum equivalent stress according to the Coulomb–Tresca criterion reached 115 MPa (2D) and 117 MPa (3D), with less than 2% deviation, confirming the adequacy of the axisymmetric model. Stress linearization shows that the maximum combined primary membrane and bending stress (109.5 MPa) remains well below the ASME allowable limit of 308 MPa, while the discontinuity influence zone extends approximately 120–150 mm from the junction. The results confirm compliance with ASME VIII Division 2 requirements and demonstrate that the combined analytical–numerical approach provides a reliable method for evaluating stress concentration effects in railway tank wagons.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, 100680 Ploiesti, Romania.
ORCID-Profile: Costin Nicolae Ilincă, Rami Doukeh, Ibrahim Naim Ramadan, Adrian Neacsa, Alin Diniță, Eugen Victor Laudacescu, Marius Gabriel Petrescu
Förderung
- Petroleum & Gas University of Ploieşti
- Petroleum-Gas University of Ploiesti
- Material Characteristics on the Operational Behavior of Shell Structures
Zitieren
APA
Ilincă, C. N., Doukeh, R., Ramadan, I. N., Neacsa, A., Diniță, A., Laudacescu, E. V., Petrescu, M. G., Ilie, B., & Sîrbu, A. C. (2026). ASME-Based Structural Assessment of Head–Shell Junctions in Pressurized Railway Tank Wagons. Materials, 19(6), 1125. https://doi.org/10.3390/ma19061125
Vancouver
Ilincă CN, Doukeh R, Ramadan IN, Neacsa A, Diniță A, Laudacescu EV, et al. ASME-Based Structural Assessment of Head–Shell Junctions in Pressurized Railway Tank Wagons. Materials. 2026;19(6):1125. doi:10.3390/ma19061125
BibTeX
@article{Ilinc2026,
author = {Ilincă, Costin Nicolae and Doukeh, Rami and Ramadan, Ibrahim Naim and Neacsa, Adrian and Diniță, Alin and Laudacescu, Eugen Victor and Petrescu, Marius Gabriel and Ilie, Bogdan and Sîrbu, Andrei Cosmin},
title = {ASME-Based Structural Assessment of Head–Shell Junctions in Pressurized Railway Tank Wagons},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1125},
doi = {10.3390/ma19061125}
}
EUVIMED