Zero-Power Wireless Preamplifier System For In situ-Pressurized Tank Structural Health Monitoring
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33883 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Daoyu Yao und 6 weiteren Autor:innen.
Abstract (Originalsprache)
By extending the service life of structures, structural health monitoring (SHM) is a key approach for reducing society’s environmental footprint. Among SHM methods, Acoustic Emission (AE) is efficient as it allows both the detection and localization of damage that may occur during a structure’s service life. Traditional wired AE systems used in non-destructive testing campaigns require a quite long preparation time, mainly because of the wires to be set and identified. Besides, a certain quantity of the power is dissipated in both wiring devices and preamplifier circuit. For SHM devices, wires represent an obstacle to the implementation of a permanent monitoring system. Furthermore, in cases such as hydrogen tank monitoring, the setting of a SHM device in ATEX environment should require low electric power devices. In this context, we design and develop a wireless sensor system capable of amplifying acoustic signals and monitoring tank structures. This offers an innovative solution for continuous, sustainable, and real-time SHM based on rectifiers for power harvesting and ambient backscattering for wireless data transmission. Compared to a conventional AE system, the designed system involves electromagnetic waves (EW), which are used for two purposes. Firstly, they provide an energy source to power a previously designed ultra-low power consumption common-source voltage preamplifier (VPA) for conditioning the acoustic signals before wireless transmission. Secondly, the EW act as a carrier for the AE signal probed by the transducer, via a designed passive circuit which consists of nonlinear resistances of diode and MOSFET, controlled by the transducer signal. The transducer data is thus transmitted via sensor’s antenna in real-time by changing antenna scattering coefficient Γ. The proposed system requires no external voltage or power supply apart from the ambient radiofrequency (RF) waves. Using a quarter‑wave antenna and a 910 MHz carrier at 1 dBm, we demonstrate reliable backscatter reception of acoustic signals at 1.5 m. The demonstration of the wireless AE preamplification prototype is done with different types of acoustic sources: continuous air flow, and electrically driven ultrasonic emitter (continuous and pulse signals), in order to simulate two potential applications of acoustic emission: leak detection and crack detection in pressurized tanks. The performance and limitations of the ongoing preamplifier are analyzed and compared with conventional wired sensors. The authors would like to acknowledge the fundings from the Region Nouvelle Aquitaine (AAPR2024I-2023-32394910, AAPR2024A-2023-32393310), the Univ. Bordeaux RRI BEST Factory of the Future and CETIM (ADERA NRP-2024-1141).
Zitieren
APA
Yao, D., Renier, M., Lachaud, J., Dejous, C., Hodé, R., Zhang, F., & Hemour, S. (2026). Zero-Power Wireless Preamplifier System For In situ-Pressurized Tank Structural Health Monitoring. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33883
Vancouver
Yao D, Renier M, Lachaud J, Dejous C, Hodé R, Zhang F, et al. Zero-Power Wireless Preamplifier System For In situ-Pressurized Tank Structural Health Monitoring. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33883
BibTeX
@article{Yao2026,
author = {Yao, Daoyu and Renier, Mathieu and Lachaud, Jean-Luc and Dejous, Corinne and Hodé, Romain and Zhang, Fan and Hemour, Simon},
title = {Zero-Power Wireless Preamplifier System For In situ-Pressurized Tank Structural Health Monitoring},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33883}
}
EUVIMED