EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Printing Hybrid, Interdigitated Back-Contact Solar Cells

Guancheng Li, David Angel Trujillo iD, Robert L Opila iD

Materials · 04.03.2026 · 19 (5) · 985

DOI: 10.3390/ma19050985 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.03.2026. Verfasst von Guancheng Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, U.S. National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interdigitated back-contact solar cells were fabricated entirely with inkjet printing. poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), TiO2, and metal lines were printed on a textured silicon substrate with only one inkjet printer. No vacuum deposition or diffusion of a back surface field is needed for the printed IBC solar cell. Adding co-solvent to the PEDOT:PSS and passivation of the Si surface significantly reduced the losses and enhanced the short-circuit current, Jsc, and, as a result, improved the fill factor and efficiency of the devices. The thickness of the PEDOT:PSS layer is approximately half a micrometer measured by profilometer, which is thicker than the optimal range typically reported; there is still a best short-circuit current, Jsc, of 19.2 mA/cm2. To further improve the performance of the devices, an anti-reflective coating on the front side is required. Also, an improved metal contact ink is needed to improve the contact resistance between the PEDOT:PSS layer and the metal contact. The initial performance of all printed cells are compared to conventionally fabricated devices.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSSheterojunctioninkjet printinginterdigitated back-contactsphotovoltaicssolar cells

Autor:innen und Institutionen

  • Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA.

ORCID-Profile: David Angel Trujillo, Robert L Opila

Förderung

  • National Science Foundation
  • U.S. National Science Foundation

Zitieren

APA

Li, G., Angel Trujillo, D., & Opila, R. L. (2026). Printing Hybrid, Interdigitated Back-Contact Solar Cells. Materials, 19(5), 985. https://doi.org/10.3390/ma19050985

Vancouver

Li G, Angel Trujillo D, Opila RL. Printing Hybrid, Interdigitated Back-Contact Solar Cells. Materials. 2026;19(5):985. doi:10.3390/ma19050985

BibTeX
@article{Li2026,
  author = {Li, Guancheng and Angel Trujillo, David and Opila, Robert L},
  title = {Printing Hybrid, Interdigitated Back-Contact Solar Cells},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {985},
  doi = {10.3390/ma19050985}
}
Kostenlos starten →