EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Assessment of Conventional and Microwave Curing Synthesis Routes for Metakaolin-Based Porous Geopolymers: Characterization and Environmental Metrics

Karen R Miranda-German, Alejandro Teran-Dagnino iD, Ramón Corral-Higuera iD, Araceli Jacobo-Azuara iD, Nancy E Dávila-Guzmán iD, Víctor M Orozco-Carmona iD, Carlos A Rosas Casarez iD, Manuel J Pellegrini Cervantes iD, Susana P Arredondo-Rea iD

Materials · 04.03.2026 · 19 (5) · 984

DOI: 10.3390/ma19050984 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.03.2026. Verfasst von Karen R Miranda-German und 8 weiteren Autor:innen. Beteiligte Einrichtung: Facultad de Ingeniería Mochis, Universidad Autónoma de Sinaloa, Los Mochis C.P. 81223, Sinaloa, Mexico. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Geopolymers have gained relevance in environmental applications, and in recent years they have been studied as sustainable adsorbent materials. Increasing their porosity remains one of the main challenges. Various methodologies have been applied for the synthesis of porous geopolymers; however, energy efficiency and environmental considerations associated with the synthesis process must be considered. This study compares two synthesis routes for porous metakaolin-based geopolymers using hydrogen peroxide as a foaming agent and two curing methods: conventional oven curing and microwave-assisted curing. Structural, physical, and chemical properties were evaluated using XRD, FT-IR, SEM/EDS, TGA, and density–porosity analyses. Additionally, a quantitative environmental assessment based on the 12 principles of green chemistry was conducted using the DOZNTM software version 2.0. The results confirmed that the addition of H2O2 did not alter the geopolymeric structure, as evidenced by FT-IR and XRD, regardless of curing method. Porosity increased significantly with the foaming agent, reaching up to ~65% for conventionally cured samples and a maximum of 67% for microwave-cured geopolymers at 3 wt% H2O2, with a minimum bulk density of 0.79 g/cm3. High-power microwave-assisted curing reduced the synthesis time to 5 min (≈80% reduction) while promoting a more developed and interconnected macroporous structure, as observed by SEM and supported by enhanced water retention behavior in TGA analyses. The green chemistry assessment demonstrated that microwave curing presents a lower overall impact within the DOZNTM framework, primarily associated with improved energy efficiency (GCP-6), while acknowledging that this assessment does not constitute a full life cycle analysis. Overall, microwave-assisted synthesis emerges as a more sustainable and efficient route for producing highly porous, hydrophilic geopolymers with strong potential for the adsorption of aqueous pollutants in environmental applications.

Schlagwörter

Stichwörter der Autor:innen

densityfoaming agentsgreen chemistryhydrogen peroxidemetakaolinmicrowave curingporosityporous geopolymers

Autor:innen und Institutionen

  • Facultad de Ingeniería Mochis, Universidad Autónoma de Sinaloa, Los Mochis C.P. 81223, Sinaloa, Mexico.
  • División de Ciencias Naturales y Exactas, Universidad de Guanajuato, Col. Noria Alta S/N, Guanajuato C.P. 36050, Guanajuato, Mexico.
  • Facultad de Ciencias Químicas, Universidad Autónoma de Nuevo León (UANL), Av. Universidad, Cd. Universitaria, San Nicolás de los Garza C.P. 66455, Nuevo León, Mexico.
  • Centro de Investigación en Materiales Avanzados (CIMAV), Av. Miguel de Cervantes Saavedra 120, Complejo Industrial Chihuahua, Chihuahua C.P. 31136, Chihuahua, Mexico.
  • Departamento de Ingeniería y Tecnología, Universidad Autónoma de Occidente (UAdeO), Guasave C.P. 81048, Sinaloa, Mexico.

ORCID-Profile: Alejandro Teran-Dagnino, Ramón Corral-Higuera, Araceli Jacobo-Azuara, Nancy E Dávila-Guzmán, Víctor M Orozco-Carmona, Carlos A Rosas Casarez, Manuel J Pellegrini Cervantes, Susana P Arredondo-Rea

Zitieren

APA

Miranda-German, K. R., Teran-Dagnino, A., Corral-Higuera, R., Jacobo-Azuara, A., Dávila-Guzmán, N. E., Orozco-Carmona, V. M., Rosas Casarez, C. A., Pellegrini Cervantes, M. J., & Arredondo-Rea, S. P. (2026). Comparative Assessment of Conventional and Microwave Curing Synthesis Routes for Metakaolin-Based Porous Geopolymers: Characterization and Environmental Metrics. Materials, 19(5), 984. https://doi.org/10.3390/ma19050984

Vancouver

Miranda-German KR, Teran-Dagnino A, Corral-Higuera R, Jacobo-Azuara A, Dávila-Guzmán NE, Orozco-Carmona VM, et al. Comparative Assessment of Conventional and Microwave Curing Synthesis Routes for Metakaolin-Based Porous Geopolymers: Characterization and Environmental Metrics. Materials. 2026;19(5):984. doi:10.3390/ma19050984

BibTeX
@article{MirandaGerman2026,
  author = {Miranda-German, Karen R and Teran-Dagnino, Alejandro and Corral-Higuera, Ramón and Jacobo-Azuara, Araceli and Dávila-Guzmán, Nancy E and Orozco-Carmona, Víctor M and Rosas Casarez, Carlos A and Pellegrini Cervantes, Manuel J and Arredondo-Rea, Susana P},
  title = {Comparative Assessment of Conventional and Microwave Curing Synthesis Routes for Metakaolin-Based Porous Geopolymers: Characterization and Environmental Metrics},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {984},
  doi = {10.3390/ma19050984}
}
Kostenlos starten →