EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Novel Approach for the Fabrication of Composite Rocket Propellant: Increased Homogeneity and Its Influence on SRP Behaviour

Kinga Janowska iD, Marcin Procek iD, Tymon Warski iD, Mateusz Polis iD, Agnieszka Stolarczyk iD, Lukasz Hawelek iD

Materials · 03.03.2026 · 19 (5) · 979

DOI: 10.3390/ma19050979 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.03.2026. Verfasst von Kinga Janowska und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, 44-100 Gliwice, Poland. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: scientific and innovative merit, Excellence Initiative—Research University program, Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the feasibility of electrospraying as an alternative processing technique for the preparation of composite solid rocket propellants (SRPs) was investigated. The main objective was to improve microstructural homogeneity and interfacial contact between the oxidizer, energetic additive, and metallic fuel without altering the chemical composition of the formulation. Additionally, porous electrosprayed SRP formulations were prepared to examine the influence of controlled porosity on thermal decomposition behavior. The prepared materials were characterized using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM/EDS) to assess microstructural features and component distribution. Thermal decomposition behavior and kinetic parameters were evaluated using simultaneous DSC/TG analysis conducted at multiple heating rates. Safety-related properties were assessed through friction sensitivity testing, while post-decomposition solid residues were analyzed using SEM/EDS and X-ray diffraction. The results show that electrospraying improves structural homogeneity, reduces solid residue formation after thermal decomposition, and decreases apparent activation energy, while maintaining unchanged friction sensitivity. These findings demonstrate the potential of electrospraying as a physical processing route for tailoring the microstructure and thermal behavior of composite solid rocket propellants.

Schlagwörter

Stichwörter der Autor:innen

electrosprayingenergetic materialsmicrostructural homogeneityporositysolid rocket propellantthermal decomposition

Autor:innen und Institutionen

  • Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, 44-100 Gliwice, Poland.
  • Department of Optoelectronics, Silesian University of Technology, 44-100 Gliwice, Poland.
  • Institute of Non-Ferrous Metals, Lukasiewicz Research Network, 44-100 Gliwice, Poland.
  • Institute of Industrial Organic Chemistry, Lukasiewicz Research Network, 42-693 Krupski Młyn, Poland.
  • Institute of Aviation, Lukasiewicz Research Network, 02-256 Warszawa, Poland.

ORCID-Profile: Kinga Janowska, Marcin Procek, Tymon Warski, Mateusz Polis, Agnieszka Stolarczyk, Lukasz Hawelek

Förderung

  • scientific and innovative merit
  • Excellence Initiative—Research University program
  • Silesian University of Technology

Zitieren

APA

Janowska, K., Procek, M., Warski, T., Polis, M., Stolarczyk, A., & Hawelek, L. (2026). Novel Approach for the Fabrication of Composite Rocket Propellant: Increased Homogeneity and Its Influence on SRP Behaviour. Materials, 19(5), 979. https://doi.org/10.3390/ma19050979

Vancouver

Janowska K, Procek M, Warski T, Polis M, Stolarczyk A, Hawelek L. Novel Approach for the Fabrication of Composite Rocket Propellant: Increased Homogeneity and Its Influence on SRP Behaviour. Materials. 2026;19(5):979. doi:10.3390/ma19050979

BibTeX
@article{Janowska2026,
  author = {Janowska, Kinga and Procek, Marcin and Warski, Tymon and Polis, Mateusz and Stolarczyk, Agnieszka and Hawelek, Lukasz},
  title = {Novel Approach for the Fabrication of Composite Rocket Propellant: Increased Homogeneity and Its Influence on SRP Behaviour},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {979},
  doi = {10.3390/ma19050979}
}
Kostenlos starten →