Analysis of Niobium and Stainless Steel Electropolishing Solutions by Laser-Induced Breakdown Spectroscopy Using a Porous Silicon Substrate and a Non-Contact Pretreatment
Materials · 06.02.2026 · 19 (3) · 637
DOI: 10.3390/ma19030637 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2026. Verfasst von Ayumu Matsumoto und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Materials Science, Graduate School of Engineering, University of Hyogo, 2167 Shosha, Himeji 671-2280, Japan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Industry-Academia Collaborative Research Grant from Himeji City, JSPS KAKENHI.
Abstract (Originalsprache)
Electropolishing is an essential process for the surface treatment of metallic materials. To determine the appropriate replacement timing of electropolishing solutions for their efficient use and improved productivity, it is important to periodically analyze the amounts of dissolved metals in the solutions. However, these solutions are typically highly corrosive, and on-site analytical techniques that can be easily applied at production sites have not yet been established. In this study, we demonstrated microvolume liquid analysis using low-energy laser-induced breakdown spectroscopy (LIBS) combined with a porous silicon substrate fabricated by metal-assisted etching (metal-assisted chemical etching) and a non-contact gas-blowing pretreatment. In the analysis of electropolishing solutions used for niobium superconducting cavities and stainless steel products, emission lines of niobium and of iron and chromium were successfully detected after blowing the respective microdroplet samples on porous silicon, and linear correlations were observed between the spectral line intensity and the polished amounts. The present results provide a basis for future on-site application of LIBS to highly corrosive electropolishing solutions in the metal finishing industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering and Materials Science, Graduate School of Engineering, University of Hyogo, 2167 Shosha, Himeji 671-2280, Japan.
- Marui Galvanizing Co., Ltd., 402 Kou, Shirahama-cho, Himeji 672-8023, Japan.
ORCID-Profile: Ayumu Matsumoto, Shinji Yae
Förderung
- Japan Society for the Promotion of Science
- Industry-Academia Collaborative Research Grant from Himeji City
- JSPS KAKENHI
Zitieren
APA
Matsumoto, A., Takeda, Y., Kuroda, K., Torigoe, H., Sugita, Y., Shimazu, Y., Nii, K., Ida, Y., & Yae, S. (2026). Analysis of Niobium and Stainless Steel Electropolishing Solutions by Laser-Induced Breakdown Spectroscopy Using a Porous Silicon Substrate and a Non-Contact Pretreatment. Materials, 19(3), 637. https://doi.org/10.3390/ma19030637
Vancouver
Matsumoto A, Takeda Y, Kuroda K, Torigoe H, Sugita Y, Shimazu Y, et al. Analysis of Niobium and Stainless Steel Electropolishing Solutions by Laser-Induced Breakdown Spectroscopy Using a Porous Silicon Substrate and a Non-Contact Pretreatment. Materials. 2026;19(3):637. doi:10.3390/ma19030637
BibTeX
@article{Matsumoto2026,
author = {Matsumoto, Ayumu and Takeda, Yuki and Kuroda, Kiichi and Torigoe, Hiroto and Sugita, Yui and Shimazu, Yusuke and Nii, Keisuke and Ida, Yoshiaki and Yae, Shinji},
title = {Analysis of Niobium and Stainless Steel Electropolishing Solutions by Laser-Induced Breakdown Spectroscopy Using a Porous Silicon Substrate and a Non-Contact Pretreatment},
journal = {Materials},
year = {2026},
volume = {19},
number = {3},
pages = {637},
doi = {10.3390/ma19030637}
}
EUVIMED