Engineering Performance, Environmental and Economic Assessment of Pavement Reconstruction Using Cold In-Place Recycling with Foamed Bitumen: A Municipal Road Case Study
Materials · 25.12.2025 · 19 (1) · 83
DOI: 10.3390/ma19010083 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.12.2025. Verfasst von Justyna Stępień und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Transportation Engineering, Faculty of Civil Engineering and Architecture, Kielce University of Technology, al. Tysiąclecia Państwa Pol…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 93 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kielce University of Technology, Poland.
Abstract (Originalsprache)
Modernizing municipal roads requires rehabilitation strategies that ensure adequate structural performance while reducing environmental and economic burdens. Although cold in-place recycling with foamed bitumen (CIR-FB) has been widely investigated, integrated assessments combining mechanistic–empirical modeling with LCA and LCCA remain limited—particularly for municipal roads in Central and Eastern Europe, where reclaimed asphalt pavement (RAP) quality, climatic conditions and budget constraints differ from commonly studied regions. This study compares two reconstruction variants for a 1 km road section: a conventional design using virgin materials (V1-N) and a recycling-based alternative (V2-Rc) incorporating RAP from the existing wearing and binder layers and reclaimed aggregate (RA) from the existing base. CIR-FB mixture testing (stiffness ≈ 5.25 GPa; foamed bitumen = 2.5%, cement = 2.0%) was integrated into mechanistic–empirical fatigue analysis, material-flow quantification, LCA and LCCA. The V2-Rc variant achieved a 3–21-fold increase in fatigue life compared to V1-N at equal thickness. Material demand decreased by approximately 27%, demolition waste by approximately 39%, and approximately 92% of the existing pavement was reused in situ. Transport work was reduced five-fold (veh-km) and more than six-fold (t-km). LCA showed a 15.9% reduction in CO2-eq emissions, while LCCA indicated approximately 19% lower construction cost, with advantages remaining robust under ±20% sensitivity. The results demonstrate that CIR-FB, when supported by proper RAP/RA characterization, can substantially improve structural, environmental and economic performance in municipal road rehabilitation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Transportation Engineering, Faculty of Civil Engineering and Architecture, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland.
- Faculty of Civil Engineering and Architecture, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland.
ORCID-Profile: Justyna Stępień, Anna Chomicz-Kowalska, Krzysztof Maciejewski
Förderung
- Kielce University of Technology, Poland
Zitieren
APA
Stępień, J., Chomicz-Kowalska, A., Maciejewski, K., & Wąsik, P. (2025). Engineering Performance, Environmental and Economic Assessment of Pavement Reconstruction Using Cold In-Place Recycling with Foamed Bitumen: A Municipal Road Case Study. Materials, 19(1), 83. https://doi.org/10.3390/ma19010083
Vancouver
Stępień J, Chomicz-Kowalska A, Maciejewski K, Wąsik P. Engineering Performance, Environmental and Economic Assessment of Pavement Reconstruction Using Cold In-Place Recycling with Foamed Bitumen: A Municipal Road Case Study. Materials. 2025;19(1):83. doi:10.3390/ma19010083
BibTeX
@article{Stpie2025,
author = {Stępień, Justyna and Chomicz-Kowalska, Anna and Maciejewski, Krzysztof and Wąsik, Patrycja},
title = {Engineering Performance, Environmental and Economic Assessment of Pavement Reconstruction Using Cold In-Place Recycling with Foamed Bitumen: A Municipal Road Case Study},
journal = {Materials},
year = {2025},
volume = {19},
number = {1},
pages = {83},
doi = {10.3390/ma19010083}
}
EUVIMED