EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comprehensive Structural and Interfacial Characterization of Laser-Sliced SiC Wafers

Hong Chen, Seul Lee, Minseung Kang, Hye Seon Youn, Seongwon Go, Eunsook Kang, Chae-Ryong Cho iD

Materials · 14.12.2025 · 18 (24) · 5615

DOI: 10.3390/ma18245615 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.12.2025. Verfasst von Hong Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nano Fusion Technology, Pusan National University, Busan 46241, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Innovation System & Education (RISE), Ministry of Education (MOE), Busan Metropolitan City, Republic of Korea, Ministry of Education (MOE) and Busan Metropolitan City, Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser slicing has emerged as a promising low-kerf and low-damage technique for SiC wafer fabrication; however, its effects on the crystal integrity, near-surface modification, and charge-transport properties require further clarification. Here, a heavily N-doped 4° off-axis 4H-SiC wafer was sliced using an ultraviolet (UV) picosecond laser, and both laser-irradiated and laser-sliced surfaces were comprehensively characterized. X-ray diffraction and pole figure measurements confirmed that the 4H stacking sequence and macroscopic crystal orientation were preserved after slicing. Raman spectroscopy, including analysis of the folded transverse-optical and longitudinal-optical phonon–plasmon coupled modes, enabled dielectric function fitting and determination of the plasmon frequency, yielding a free-carrier concentration of ~3.1 × 1018 cm−3. Hall measurements provided consistent carrier density, mobility, and resistivity, demonstrating that the laser slicing process did not degrade bulk electrical properties. Multi-scale Atomic Force Microscopy (AFM), Angle-Resolved X-Ray Photoelectron Spectroscopy (ARXPS), Secondary Ion Mass Spectrometry (SIMS), and Transmission Electron Microscopy (TEM)/Selected Area Electron Diffraction (SAED) analyses revealed the formation of a near-surface thin amorphous/polycrystalline modified layer and an oxygen-rich region, with significantly increased roughness and thicker modified layers on the hilly regions of the sliced surface. These results indicate that UV laser slicing maintains the intrinsic crystalline and electrical properties of 4H-SiC while introducing localized nanoscale surface damage that must be minimized by optimizing the slicing parameters and the subsequent surface-finishing processes.

Schlagwörter

Stichwörter der Autor:innen

ARXPSSIMSSiC waferTEMcrystal integritylaser slicingsurface damage

Autor:innen und Institutionen

  • Department of Nano Fusion Technology, Pusan National University, Busan 46241, Republic of Korea.
  • R&D Center, Unis Co., Ltd., 1394 Nakdong-daero, Sasang-gu, Busan 46907, Republic of Korea.
  • Department of Nano Energy Engineering, Pusan National University, Busan 46241, Republic of Korea.

ORCID-Profile: Chae-Ryong Cho

Förderung

  • Regional Innovation System & Education (RISE), Ministry of Education (MOE), Busan Metropolitan City, Republic of Korea
  • Ministry of Education (MOE) and Busan Metropolitan City, Republic of Korea

Zitieren

APA

Chen, H., Lee, S., Kang, M., Youn, H. S., Go, S., Kang, E., & Cho, C. R. (2025). Comprehensive Structural and Interfacial Characterization of Laser-Sliced SiC Wafers. Materials, 18(24), 5615. https://doi.org/10.3390/ma18245615

Vancouver

Chen H, Lee S, Kang M, Youn HS, Go S, Kang E, et al. Comprehensive Structural and Interfacial Characterization of Laser-Sliced SiC Wafers. Materials. 2025;18(24):5615. doi:10.3390/ma18245615

BibTeX
@article{Chen2025,
  author = {Chen, Hong and Lee, Seul and Kang, Minseung and Youn, Hye Seon and Go, Seongwon and Kang, Eunsook and Cho, Chae-Ryong},
  title = {Comprehensive Structural and Interfacial Characterization of Laser-Sliced SiC Wafers},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {24},
  pages = {5615},
  doi = {10.3390/ma18245615}
}
Kostenlos starten →