EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation on Tensile and Compressive Properties of 3D Four-Directional Braided Composites

Longcan Chen iD, Feilong Dou, Jun Wang, Guangxi Li, Binchao Li, Jin Zhou iD, Yong Xue, Shenghao Zhang iD, Di Zhang iD

Materials · 12.12.2025 · 18 (24) · 5592

DOI: 10.3390/ma18245592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.12.2025. Verfasst von Longcan Chen und 8 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Aerospace Liquid Propulsion, Xi'an Aerospace Propulsion Institute, Xi'an 710100, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of braiding angles on the mechanical behavior and damage mechanisms of three-dimensional (3D) braided composites under uniaxial compressive and tensile loading. By integrating uniaxial compression and tension tests with finite element (FE) analysis, the relationships between mesoscale damage initiation, propagation, and the macroscopic mechanical properties were revealed. Results demonstrate that the 3D4d-20° model exhibits higher stiffness and compressive strength but lower compressive failure strain compared to the 3D4d-40° model, attributed to differences in fiber spatial arrangement and matrix cracking propagation. Conversely, the 3D4d-40° model shows enhanced tensile performance but greater matrix-dominated damage under tension. Moreover, as the braiding angle increases, the ratio of tensile strength to compressive strength in 3D braided composites decreases accordingly. Comparative analysis of damage evolution pathways reveals that smaller braiding angles (20°) initiate damage earlier under compression, while larger angles (40°) promote transverse fiber bundle failure and matrix degradation. This research not only elucidates the underlying microscale damage mechanisms of 3D braided composites under compression loading but also highlights the differences in damage patterns between compressive and tensile loading, providing theoretical foundations for structural design and performance optimization of such composite materials. Future work will focus on incorporating interfacial effects and manufacturing-induced defects to refine the model further.

Schlagwörter

Stichwörter der Autor:innen

3D braided compositesFE analysisbraiding angledamage mechanismsmechanical behavior

Autor:innen und Institutionen

  • National Key Laboratory of Aerospace Liquid Propulsion, Xi'an Aerospace Propulsion Institute, Xi'an 710100, China.
  • Ramjet Engine Research Laboratory of Stamping and Combined Power Division, Xi'an Aerospace Propulsion Institute, Xi'an 710100, China.
  • School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • Technical Department, Xi'an Oude Rubber & Plastic Technology Co., Ltd., Xi'an 710200, China.

ORCID-Profile: Longcan Chen, Jin Zhou, Shenghao Zhang, Di Zhang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, L., Dou, F., Wang, J., Li, G., Li, B., Zhou, J., Xue, Y., Zhang, S., & Zhang, D. (2025). Numerical Investigation on Tensile and Compressive Properties of 3D Four-Directional Braided Composites. Materials, 18(24), 5592. https://doi.org/10.3390/ma18245592

Vancouver

Chen L, Dou F, Wang J, Li G, Li B, Zhou J, et al. Numerical Investigation on Tensile and Compressive Properties of 3D Four-Directional Braided Composites. Materials. 2025;18(24):5592. doi:10.3390/ma18245592

BibTeX
@article{Chen2025,
  author = {Chen, Longcan and Dou, Feilong and Wang, Jun and Li, Guangxi and Li, Binchao and Zhou, Jin and Xue, Yong and Zhang, Shenghao and Zhang, Di},
  title = {Numerical Investigation on Tensile and Compressive Properties of 3D Four-Directional Braided Composites},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {24},
  pages = {5592},
  doi = {10.3390/ma18245592}
}
Kostenlos starten →