Compressive Failure Characteristics of 3D Four-Directional Braided Composites with Prefabricated Holes
Materials · 02.08.2024 · 17 (15) · 3821
DOI: 10.3390/ma17153821 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2024. Verfasst von Xin Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Mechanics, Harbin University of Science and Technology, Harbin 150080, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province.
Abstract (Originalsprache)
The low delamination tendency and high damage tolerance of three-dimensional (3D) braided composites highlight their significant potential in handling defects. To enhance the engineering potential of three-dimensional four-directional (3D4d) braided composites and assess the failure mode of hole defects, this study introduces a series of 3D4d braided composites with prefabricated holes, studying their compressive properties and failure mechanisms through experimental and finite element methods. Digital image correlation (DIC) was used to monitor the compressive strain on the surface of materials. Scanning acoustic microscope (SAM) and scanning electron microscopy (SEM) were used to characterize the longitudinal compression failure mode inside the material. A macroscopic model is established, and the porous materials are predicted by using the general braided composite material prediction theory. While reducing the forecast cost, the error is also controlled within 21%. The analysis of failure mechanisms elucidates the damage extension mode, and the porous damage tolerance ability aligns closely with the bearing mode of braided material structure. Different braiding angles will lead to different bearing modes of materials. Under longitudinal compression, the average strength loss of 15° specimens is 38.21%, and that of 30° specimens is 8.1%. The larger the braided angle, the stronger the porous damage tolerance. Different types of prefabricated holes will also affect their mechanical properties and damage tolerance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering Mechanics, Harbin University of Science and Technology, Harbin 150080, China.
- Department of Engineering Mechanics, Beijing Institute of Astronautical Systems Engineering, Beijing 100076, China.
- College of Aeronautics and Astronautics, North China Institute of Aerospace Engineering, Langfang 065000, China.
ORCID-Profile: Yuxuan Zhang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hebei Province
Zitieren
APA
Wang, X., Li, H., Zhang, Y., Guan, Y., Yan, S., & Zhai, J. (2024). Compressive Failure Characteristics of 3D Four-Directional Braided Composites with Prefabricated Holes. Materials, 17(15), 3821. https://doi.org/10.3390/ma17153821
Vancouver
Wang X, Li H, Zhang Y, Guan Y, Yan S, Zhai J. Compressive Failure Characteristics of 3D Four-Directional Braided Composites with Prefabricated Holes. Materials. 2024;17(15):3821. doi:10.3390/ma17153821
BibTeX
@article{Wang2024,
author = {Wang, Xin and Li, Hanhua and Zhang, Yuxuan and Guan, Yue and Yan, Shi and Zhai, Junjun},
title = {Compressive Failure Characteristics of 3D Four-Directional Braided Composites with Prefabricated Holes},
journal = {Materials},
year = {2024},
volume = {17},
number = {15},
pages = {3821},
doi = {10.3390/ma17153821}
}
EUVIMED