Optimization of Anti-Fouling Piezoelectric Composite Coating for High-Voltage Insulators in Converter Stations
Materials · 21.11.2025 · 18 (23) · 5270
DOI: 10.3390/ma18235270 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.11.2025. Verfasst von Yanwen Ouyang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics and Technology, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Project of China Southern PowerGrid Co., Ltd., China Southern Power Grid Co., Ltd..
Abstract (Originalsprache)
Under the DC field, live contamination is more likely to deposit on the surface of insulators due to the action of the external electric field. The deposition of dirt on the surface of Ultra High Voltage (UHV) insulators can lead to the occurrence of flashover phenomena, causing significant economic losses. Due to the particularity of UHV insulators, many traditional surface anti-pollution technologies designed for normal voltage insulators are not applicable to them. In order to prevent the harm of contamination accumulation affecting the safe operation of transmission lines, in this study, tetragonal BaTiO3 was mixed into room-temperature vulcanized silicone rubber for the first time to prepare a composite coating with piezoelectric properties. This coating can use the piezoelectric effect to remove the contamination adhering to the surface of UHV insulators under a DC field. In this study, the piezoelectric properties of the prepared tetragonal BaTiO3 were verified through material characterization. The results show that the introduction of piezoelectric fillers can significantly accelerate the dissipation of charges on the insulator surface under slight disturbances, which helps to reduce the accumulation of charged pollutants on the insulator surface. The anti-pollution performance under electric field conditions was verified through a simulation experimental device. Finally, through experiments in a real converter station environment, the anti-pollution effect of the insulator under actual working conditions was verified.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Physics and Technology, Wuhan University, Wuhan 430072, China.
- Hubei Key Laboratory of Marine Electromagnetic Detection and Control, Wuhan 430064, China.
- Wuhan Second Ship Design and Research Institute, Wuhan 430064, China.
- Electric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou 510080, China.
ORCID-Profile: Meng Chen, Pengfei Fang
Förderung
- Technology Project of China Southern PowerGrid Co., Ltd.
- China Southern Power Grid Co., Ltd.
Zitieren
APA
Ouyang, Y., Chen, M., Pan, S., Wang, Q., Qian, Y., Li, Y., Liu, Y., & Fang, P. (2025). Optimization of Anti-Fouling Piezoelectric Composite Coating for High-Voltage Insulators in Converter Stations. Materials, 18(23), 5270. https://doi.org/10.3390/ma18235270
Vancouver
Ouyang Y, Chen M, Pan S, Wang Q, Qian Y, Li Y, et al. Optimization of Anti-Fouling Piezoelectric Composite Coating for High-Voltage Insulators in Converter Stations. Materials. 2025;18(23):5270. doi:10.3390/ma18235270
BibTeX
@article{Ouyang2025,
author = {Ouyang, Yanwen and Chen, Meng and Pan, Siwei and Wang, Qing and Qian, Yihua and Li, Yuanyuan and Liu, Yong and Fang, Pengfei},
title = {Optimization of Anti-Fouling Piezoelectric Composite Coating for High-Voltage Insulators in Converter Stations},
journal = {Materials},
year = {2025},
volume = {18},
number = {23},
pages = {5270},
doi = {10.3390/ma18235270}
}
EUVIMED