The Effects of Deep Cryogenic Treatment with Regard to the Mechanical Properties and Microstructural Evolution of Al-Mg Alloys with Different Grain Sizes
Materials · 28.09.2025 · 18 (19) · 4518
DOI: 10.3390/ma18194518 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2025. Verfasst von Wei Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Mechanical Engineering, Hunan Institute of Technology, Hengyang 421002, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Hunan Province, Scientific Research Fund of Hunan Provincial Education Department of China, Science and Technology Innovation Plan Project of Hengyang City.
Abstract (Originalsprache)
The tension behaviors of Al-Mg alloys were tested, and the influences of deep cryogenic treatment (DCT) and grain size on their tensile properties were explored. Optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to characterize the evolution of the microstructure. It was concluded that the alloys with fine grain (FG) had a higher strain hardening capacity and strength, however, the alloys with coarse grain (CG) exhibited better plasticity. This can be explained by the alloy with fine grains having a higher density of grain boundary, which can hinder the motion of the dislocation; therefore, the deformation resistance was improved. For alloys with coarse grains, the dislocation has more freedom to move and is easier to rearrange, which is beneficial to the plasticity. Moreover, when given deep cryogenic treatment, the strength and plasticity of the alloys can be slightly improved, which can be attributed to the microplastic deformation that occurs during cryogenic treatment that can induce internal stress, as cold-induced internal stress is conductive in achieving a finer grain and higher density of dislocation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Intelligent Manufacturing and Mechanical Engineering, Hunan Institute of Technology, Hengyang 421002, China.
- Research Institute of Automobile Parts Technology, Hunan Institute of Technology, Hengyang 421002, China.
- School of Mechanical Engineering, University of South China, Hengyang 421001, China.
ORCID-Profile: Erli Xia
Förderung
- Natural Science Foundation of Hunan Province
- Scientific Research Fund of Hunan Provincial Education Department of China
- Science and Technology Innovation Plan Project of Hengyang City
- Open Project of Provincial Application Characteristic Disciplines of Hunan Institute of Technol-ogy
- Open Project of Provincial Application Characteristic Disciplines of Hunan Institute of Technology
Zitieren
APA
Liu, W., Zhang, L., Xia, E., Luo, J., Tian, Y., Cai, W., & Gong, Y. (2025). The Effects of Deep Cryogenic Treatment with Regard to the Mechanical Properties and Microstructural Evolution of Al-Mg Alloys with Different Grain Sizes. Materials, 18(19), 4518. https://doi.org/10.3390/ma18194518
Vancouver
Liu W, Zhang L, Xia E, Luo J, Tian Y, Cai W, et al. The Effects of Deep Cryogenic Treatment with Regard to the Mechanical Properties and Microstructural Evolution of Al-Mg Alloys with Different Grain Sizes. Materials. 2025;18(19):4518. doi:10.3390/ma18194518
BibTeX
@article{Liu2025,
author = {Liu, Wei and Zhang, Luxiang and Xia, Erli and Luo, Jing and Tian, Yiran and Cai, Wentao and Gong, Yuqing},
title = {The Effects of Deep Cryogenic Treatment with Regard to the Mechanical Properties and Microstructural Evolution of Al-Mg Alloys with Different Grain Sizes},
journal = {Materials},
year = {2025},
volume = {18},
number = {19},
pages = {4518},
doi = {10.3390/ma18194518}
}
EUVIMED