A Comparison of Discrete Crack and Smeared Crack Methods Applied to CFRP/Al Riveting Damage Modeling
Materials · 28.09.2025 · 18 (19) · 4511
DOI: 10.3390/ma18194511 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2025. Verfasst von Minghao Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, Northwestern Polytechnical University, Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University.
Abstract (Originalsprache)
Carbon-fiber-reinforced-polymer/aluminum (CFRP/Al) double-sided countersunk riveted joint is a key joining technology for lightweight and high-performance aircraft structures. Advanced numerical simulation techniques are helpful in predicting riveting damage evolution and the optimization of the joining process. In this study, a discrete crack modeling (DCM) method based on the floating node method (FNM) was employed to investigate the initial riveting damage behavior and interference characteristics during the electromagnetic riveting (EMR) process with five cases of rivet-hole clearances. The results were compared with those obtained from the conventional smeared crack method (SCM). The findings show that the interference distribution along the axial direction of the joint is non-uniform, and increasing the rivet-hole clearance helps alleviate the initial riveting damage. The FNM accurately modeled the initiation and propagation of matrix cracks and delamination, albeit at the cost of some computational efficiency.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China.
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China.
- Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117565, Singapore.
Förderung
- China Scholarship Council
- Northwestern Polytechnical University
- Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University
Zitieren
APA
Zhang, M., Tian, K., Cao, Z., & Tay, T. E. (2025). A Comparison of Discrete Crack and Smeared Crack Methods Applied to CFRP/Al Riveting Damage Modeling. Materials, 18(19), 4511. https://doi.org/10.3390/ma18194511
Vancouver
Zhang M, Tian K, Cao Z, Tay TE. A Comparison of Discrete Crack and Smeared Crack Methods Applied to CFRP/Al Riveting Damage Modeling. Materials. 2025;18(19):4511. doi:10.3390/ma18194511
BibTeX
@article{Zhang2025,
author = {Zhang, Minghao and Tian, Kun and Cao, Zengqiang and Tay, Tong-Earn},
title = {A Comparison of Discrete Crack and Smeared Crack Methods Applied to CFRP/Al Riveting Damage Modeling},
journal = {Materials},
year = {2025},
volume = {18},
number = {19},
pages = {4511},
doi = {10.3390/ma18194511}
}
EUVIMED