EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation and Multi-Objective Optimization on Forming Quality of CFRP/Al Self-Piercing Riveting Joint

Feng Xiong, Xuehou Yu iD, Shuai Zhang, Dengfeng Wang, Hongyu Xu

Materials · 11.03.2025 · 18 (6) · 1233

DOI: 10.3390/ma18061233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.03.2025. Verfasst von Feng Xiong und 4 weiteren Autor:innen. Beteiligte Einrichtung: Joint International Research Laboratory of Intelligent Manufacturing & Control of Key Parts for Energy-Efficient & New Energy Vehicles, Ministry of E…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Foundation of State Key Laboratory of Automotive Simulation and Control, Research and Innovation Team Cultivation Plan of Chongqing University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Self-piercing riveting (SPR) has become a highly promising new method for connecting dissimilar materials in multi-material vehicle bodies, while the joint’s forming quality which largely affects its connection performance lacks sufficient research. This study conducted a detailed numerical investigation on the forming quality of carbon-fiber-reinforced polymer (CFRP)/aluminum alloy (Al) SPR joint and proposed a novel multi-objective optimization strategy. First, the finite element (FE) model of CFRP/Al SPR joint forming was established and then verified to monitor the forming process. Second, based on FE numerical simulation, the action laws of rivet length and die structural parameters (die depth, die gap, and die radius) on the joint’s forming quality indicators (bottom thickness and interlock value) were systematically studied to reveal the joint’s forming characteristics. Finally, taking the rivet length and die structural parameters as design variables and the above forming quality indicators as optimization objectives, a hybrid Taguchi–Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method was proposed to conduct the multi-objective optimization of the joint’s forming quality. According to the outcomes, the bottom thickness and interlock value of the joint were respectively increased by 10.18% and 34.17% compared with the baseline design, achieving a good multi-objective optimization of the joint’s forming quality, which provides an effective new method for efficiently predicting and improving the forming quality of the CFRP/Al SPR joint.

Schlagwörter

Stichwörter der Autor:innen

CFRP/AlTaguchi–TOPSISforming qualitymulti-material jointmulti-objective optimizationself-piercing riveting

Autor:innen und Institutionen

  • Joint International Research Laboratory of Intelligent Manufacturing & Control of Key Parts for Energy-Efficient & New Energy Vehicles, Ministry of Education, Chongqing University of Technology, Chongqing 400054, China.
  • State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China.
  • State Key Laboratory of Intelligent Green Vehicle and Mobility, Tsinghua University, Beijing 100084, China.
  • School of Vehicle and Traffic Engineering, Henan University of Science and Technology, Luoyang 471003, China.

ORCID-Profile: Xuehou Yu

Förderung

  • National Natural Science Foundation of China
  • Foundation of State Key Laboratory of Automotive Simulation and Control
  • Research and Innovation Team Cultivation Plan of Chongqing University of Technology
  • Synchronous Implementation Project of Chongqing University of Technology
  • Graduate Education High Quality Development Project of Chongqing University of Technology
  • Science and Technology Research Project of Henan Province
  • Industry-University-Research Collaborative Innovation Base Project on Automobile Lightweight of "Science and Technology Innovation in Central Plains"
  • Industry–University–Research Collaborative Innovation Base Project on Light-weight Automobiles of “Science and Technology Innovation in Central Plains”

Zitieren

APA

Xiong, F., Yu, X., Zhang, S., Wang, D., & Xu, H. (2025). Numerical Investigation and Multi-Objective Optimization on Forming Quality of CFRP/Al Self-Piercing Riveting Joint. Materials, 18(6), 1233. https://doi.org/10.3390/ma18061233

Vancouver

Xiong F, Yu X, Zhang S, Wang D, Xu H. Numerical Investigation and Multi-Objective Optimization on Forming Quality of CFRP/Al Self-Piercing Riveting Joint. Materials. 2025;18(6):1233. doi:10.3390/ma18061233

BibTeX
@article{Xiong2025,
  author = {Xiong, Feng and Yu, Xuehou and Zhang, Shuai and Wang, Dengfeng and Xu, Hongyu},
  title = {Numerical Investigation and Multi-Objective Optimization on Forming Quality of CFRP/Al Self-Piercing Riveting Joint},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {6},
  pages = {1233},
  doi = {10.3390/ma18061233}
}
Kostenlos starten →