EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of ZrO2 Addition and Thermal Treatment on the Microstructure and Mechanical Properties of Aluminum Metal Matrix Composites (AMMCs)

Isai Rosales-Cadena, Reyna Anahi Falcon-Castrejon, Rene Guardian-Tapia, Jose Luis Roman-Zubillaga iD, Sergio Ruben Gonzaga-Segura, Lazaro Abdiel Falcon-Franco iD, Victor Hugo Martinez-Landeros iD, Rumualdo Servin iD

Materials · 28.09.2025 · 18 (19) · 4507

DOI: 10.3390/ma18194507 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2025. Verfasst von Isai Rosales-Cadena und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center for Research in Engineering and Applied Sciences CIICAp, Autonomous University of Morelos State, Cuernavaca 62209, Morelos, Mexico. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: PRODEP.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum metal matrix composites (AMMCs) were obtained using the stir-casting method, adding 0.15, 0.25, and 0.50 in vol.% of ZrO2. Microstructural observations made using scanning electron microscopy (SEM) indicated that oxide addition modified grain size. X-ray diffraction analyses revealed that mainly ZrAl3 and Al2O3 phases had formed. Hardness evaluation indicated a maximum value of 63 HV for the zirconia-reinforced samples, representing an increase of approximately 70% compared with pure aluminum. This hardness increase was mainly attributed to the zirconia distribution in the aluminum matrix promoting lattice distortion, which promoted the inhibition of dislocation mobility. Wear tests indicated that the samples with 0.50 vol.% of ZrO2 added presented the lowest wear rate because of the hardness they acquired. The results are discussed considering composite strengthening due to ZrO2 addition and the thermal treatment applied (cooling rate).

Schlagwörter

Stichwörter der Autor:innen

AMMCshardnessheat treatmentparticle reinforcementwear

Autor:innen und Institutionen

  • Center for Research in Engineering and Applied Sciences CIICAp, Autonomous University of Morelos State, Cuernavaca 62209, Morelos, Mexico.
  • Institute of Physical Sciences, ICF-UNAM, Av Univ. 1001 Col. Chamilpa, Cuernavaca 62210, Morelos, Mexico.
  • Faculty of Metallurgy, Autonomous University of Coahuila, Highway 57 km 5, Monclova 25710, Coahuila, Mexico.
  • Faculty of Mechanical Electric Engineering, Autonomous University of Coahuila, Barranquilla S/N, Monclova 25280, Coahuila, Mexico.

ORCID-Profile: Jose Luis Roman-Zubillaga, Lazaro Abdiel Falcon-Franco, Victor Hugo Martinez-Landeros, Rumualdo Servin

Förderung

  • PRODEP

Zitieren

APA

Rosales-Cadena, I., Falcon-Castrejon, R. A., Guardian-Tapia, R., Roman-Zubillaga, J. L., Gonzaga-Segura, S. R., Falcon-Franco, L. A., Martinez-Landeros, V. H., & Servin, R. (2025). The Effect of ZrO2 Addition and Thermal Treatment on the Microstructure and Mechanical Properties of Aluminum Metal Matrix Composites (AMMCs). Materials, 18(19), 4507. https://doi.org/10.3390/ma18194507

Vancouver

Rosales-Cadena I, Falcon-Castrejon RA, Guardian-Tapia R, Roman-Zubillaga JL, Gonzaga-Segura SR, Falcon-Franco LA, et al. The Effect of ZrO2 Addition and Thermal Treatment on the Microstructure and Mechanical Properties of Aluminum Metal Matrix Composites (AMMCs). Materials. 2025;18(19):4507. doi:10.3390/ma18194507

BibTeX
@article{RosalesCadena2025,
  author = {Rosales-Cadena, Isai and Falcon-Castrejon, Reyna Anahi and Guardian-Tapia, Rene and Roman-Zubillaga, Jose Luis and Gonzaga-Segura, Sergio Ruben and Falcon-Franco, Lazaro Abdiel and Martinez-Landeros, Victor Hugo and Servin, Rumualdo},
  title = {The Effect of ZrO2 Addition and Thermal Treatment on the Microstructure and Mechanical Properties of Aluminum Metal Matrix Composites (AMMCs)},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {4507},
  doi = {10.3390/ma18194507}
}
Kostenlos starten →