Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites
Materials · 02.07.2024 · 17 (13) · 3258
DOI: 10.3390/ma17133258 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.07.2024. Verfasst von Rokaya H Abdelatty und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advanced Materials (CAM), Qatar University, Doha 2713, Qatar. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University, Researchers Supporting Project, King Saud University, Riyadh, Saudi Arabia.
Abstract (Originalsprache)
In the present investigation, aluminum metal matrix composites (AMMs) reinforced with aluminum nitride (AlN) nanoparticulates at different volumetric ratios of (0, 0.5, 1, 1.5, and 2 vol.%) were manufactured via a microwave-assisted powder metallurgy technique. The morphological, physical, mechanical, and electrochemical properties of the produced billets were examined to reflect the impact of the successive addition of AlN into the aluminum (Al) matrix. The morphological analysis revealed the high crystalline patterns of the formation of the Al-AlN composites. The microstructural analysis confirmed the presence of the elemental constituents of Al and AlN particles in the fabricated composites, showing an enhanced degree of agglomeration in conjunction with the additional amount of AlN. Positive behavior exhibited by the micro- and nanohardness was noticeable in the Al-AlN composites, especially at the ultimate concentration of AlN in the Al matrix of a 2 vol.%, where it reached 669.4 ± 28.1 MPa and 659.1 ± 11 MPa compared to the pure Al metal at 441.2 ± 20 MPa and 437.5 ± 11 MPa, respectively. A declining trend in the compressive strength was recorded in the reinforced Al samples. The corrosion resistance of the AlN-reinforced Al metal matrix was estimated at 3.5 wt.% NaCl using electrochemical impedance spectroscopy and potentiodynamic polarization. The results reveal that the inclusion of 2.0 vol.%AlN led to the lowest corrosion rate.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Advanced Materials (CAM), Qatar University, Doha 2713, Qatar.
- Materials Science and Technology Graduate Program, Department of Physics and Materials Science, Qatar University, Doha 2713, Qatar.
- Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar.
- Mechanical Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia.
ORCID-Profile: Ahmed Bahgat Radwan, Khaled Youssef, Muhammad Farzik Ijaz, Rana Abdul Shakoor
Förderung
- King Saud University
- Researchers Supporting Project
- King Saud University, Riyadh, Saudi Arabia
- Qatar National Library, Qatar
Zitieren
APA
Abdelatty, R. H., Radwan, A. B., Youssef, K., Ijaz, M. F., & Abdul Shakoor, R. (2024). Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites. Materials, 17(13), 3258. https://doi.org/10.3390/ma17133258
Vancouver
Abdelatty RH, Radwan AB, Youssef K, Ijaz MF, Abdul Shakoor R. Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites. Materials. 2024;17(13):3258. doi:10.3390/ma17133258
BibTeX
@article{Abdelatty2024,
author = {Abdelatty, Rokaya H and Radwan, Ahmed Bahgat and Youssef, Khaled and Ijaz, Muhammad Farzik and Abdul Shakoor, Rana},
title = {Effect of AlN on the Mechanical and Electrochemical Properties of Aluminum Metal Matrix Composites},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3258},
doi = {10.3390/ma17133258}
}
EUVIMED