EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimum Mix Design and Correlation Analysis of Pervious Concrete

Fenting Lu, Li Yang, Yaqing Jiang

Materials · 02.09.2025 · 18 (17) · 4129

DOI: 10.3390/ma18174129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.09.2025. Verfasst von Fenting Lu und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Wanjiang University of Technology, Ma'anshan 243031, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pervious concrete is challenged by the inherent trade-off between permeability and mechanical strength. This study presents a systematic optimization of its mix design to achieve a balance between these properties. Single-factor experiments and an L9(33) orthogonal array test were employed to evaluate the effects of target porosity (14–26%), water–cement ratio (0.26–0.34), sand rate (0–10%), and VMA dosage (0–0.02%). Additionally, Spearman rank correlation analysis and nonlinear regression fitting were utilized to develop quantitative relationships correlating the measured porosity to material performance. The results revealed that increasing target porosity enhances permeability but reduces compressive and splitting tensile strengths. The optimal water-to-cement ratio (w/c) was found to be 0.32, balancing both permeability and strength. An appropriate sand content of 6% improved mechanical properties, while a VMA dosage of 0.01% effectively enhanced bonding strength and workability. The orthogonal experiment identified the optimal mix ratio as a w/c ratio of 0.3, VMA dosage of 0.12%, target porosity of 14%, and sand content of 7%, achieving a compressive strength at 28-days of 43.5 MPa and a permeability coefficient of 2.57 mm·s−1. Empirical relationships for the permeability coefficient and mechanical properties as functions of the measured porosity were derived, demonstrating a positive exponential correlation between the measured porosity and the permeability coefficient, and a negative correlation with compressive and splitting tensile strengths. This research provides a systematic framework for designing high-performance pervious concrete with balanced permeability and mechanical properties, offering valuable insights for its development and application in green infrastructure projects.

Schlagwörter

Stichwörter der Autor:innen

correlation analysismix designorthogonal test designpervious concrete

Autor:innen und Institutionen

  • School of Civil Engineering, Wanjiang University of Technology, Ma'anshan 243031, China.

Zitieren

APA

Lu, F., Yang, L., & Jiang, Y. (2025). Optimum Mix Design and Correlation Analysis of Pervious Concrete. Materials, 18(17), 4129. https://doi.org/10.3390/ma18174129

Vancouver

Lu F, Yang L, Jiang Y. Optimum Mix Design and Correlation Analysis of Pervious Concrete. Materials. 2025;18(17):4129. doi:10.3390/ma18174129

BibTeX
@article{Lu2025,
  author = {Lu, Fenting and Yang, Li and Jiang, Yaqing},
  title = {Optimum Mix Design and Correlation Analysis of Pervious Concrete},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4129},
  doi = {10.3390/ma18174129}
}
Kostenlos starten →