EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Analysis and Admixture Optimization of GBFS-HPMC/Fiber Pervious Concrete

Xiwen Yan, Xuezhi Wang, Chuanwu Sun, Ming Xin, Jingjing He

Materials · 28.09.2023 · 16 (19) · 6455

DOI: 10.3390/ma16196455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2023. Verfasst von Xiwen Yan und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Architectural Engineering, Liaoning University of Technology, Jinzhou 121001, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research on Mechanical Properties and Durability of Fiber Reinforced Seawater Sea Sand Concrete Members in Harsh Environments, Research and Development of Key Technology and Engineering Application of Hydraulic Ductile Concrete.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Permeable pavements can decrease the volume of stormwater, thereby mitigating the risk of flooding and reducing the urban heat island effect. This study investigated the influence of incorporating granulated blast-furnace slag (GBFS), hydroxypropyl methylcellulose (HPMC), and polypropylene plastic textile fiber (PPTF) on the mechanical properties and water permeability of pervious concrete. Orthogonal tests were employed to conduct the analysis. The findings indicate that the pervious concrete with GBFS, HPMC, and PPTF (termed GBFS-HPMC/fiber pervious concrete) exhibited the highest cubic compressive strength, ultimate tensile strength, and flexural strength. These values were 25.22 MPa, 3.36 MPa, and 5.39 MPa, respectively. The standard deviations for cubic compressive strength, split tensile strength, flexural strength, water permeability coefficient, and porosity, as calculated using SPSS, were 1.57, 0.1, 1.17, 0.35, and 0.4, respectively. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) were used to analyze the microstructure and compositional combinations of the pervious concrete. The analyses revealed that the calcium-silicate-hydrate (C-S-H) gel, produced by GBFS hydration, enhanced the bonding within the interfacial transition zone (ITZ) and between the fibers and aggregates. Additionally, the anchoring and supporting effects of the PPTF in the matrix contributed to stabilizing the overall matrix structure. Lastly, a gray correlation analysis was applied to optimize the admixture. The findings indicate that following the optimization, the cubic compressive strength increased by 7.2%, splitting tensile strength by 2.1%, and flexural strength by 2.5%. In summary, the mechanical properties of pervious concrete improved after optimizing the admixture.

Schlagwörter

Stichwörter der Autor:innen

granulated blast-furnace slaggray correlation analysishydroxyl propyl methyl cellulosepervious concretepolypropylene plastic textile fiber

Autor:innen und Institutionen

  • School of Civil and Architectural Engineering, Liaoning University of Technology, Jinzhou 121001, China.
  • Power China Northwest Engineering Corporation Limited, Xi'an 710065, China.

Förderung

  • Research on Mechanical Properties and Durability of Fiber Reinforced Seawater Sea Sand Concrete Members in Harsh Environments
  • Research and Development of Key Technology and Engineering Application of Hydraulic Ductile Concrete

Zitieren

APA

Yan, X., Wang, X., Sun, C., Xin, M., & He, J. (2023). Performance Analysis and Admixture Optimization of GBFS-HPMC/Fiber Pervious Concrete. Materials, 16(19), 6455. https://doi.org/10.3390/ma16196455

Vancouver

Yan X, Wang X, Sun C, Xin M, He J. Performance Analysis and Admixture Optimization of GBFS-HPMC/Fiber Pervious Concrete. Materials. 2023;16(19):6455. doi:10.3390/ma16196455

BibTeX
@article{Yan2023,
  author = {Yan, Xiwen and Wang, Xuezhi and Sun, Chuanwu and Xin, Ming and He, Jingjing},
  title = {Performance Analysis and Admixture Optimization of GBFS-HPMC/Fiber Pervious Concrete},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {19},
  pages = {6455},
  doi = {10.3390/ma16196455}
}
Kostenlos starten →