EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Heat Treatment on Microstructures and Mechanical Properties of TC4 Alloys Prepared by Selective Laser Melting

Jian Zhang, Yuhuan Shi, Su Shen, Shengdong Zhang iD, Honghui Ding, Xiaoming Pan iD

Materials · 02.09.2025 · 18 (17) · 4126

DOI: 10.3390/ma18174126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.09.2025. Verfasst von Jian Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical & Electrical Engineering, Jining University, Jining 273155, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The reduced ductility caused by the brittle needle-like α′ martensite limits the application of TC4 alloys produced by selective laser melting (SLM). Appropriate heat treatment can improve the microstructures and properties of SLM-fabricated TC4 alloys. In this work, SLM-fabricated TC4 alloys underwent stress relief annealing at 600 °C and high-temperature annealing at 800 °C. The effects of heat treatment temperature on phase composition, microstructural morphology, grain orientation, and mechanical properties were investigated. Meanwhile, the microstructural evolution and fracture mechanisms during the heat treatment process were analyzed. The results indicate that after annealing at 600 °C, the needle-like α′ phase transforms into elongated α, and nano-β phase increases. When annealed at 800 °C, the α′ phase completely transforms into a more stable lath-shaped α phase and a short rod-shaped β phase, with the nano-β phase disappearing. The texture orientation gradually shifts from towards , where slip systems are more active. Additionally, heat treatment promotes the transition of grain boundaries to high-angle grain boundaries, thereby alleviating stress concentration and enhancing solid-solution strengthening. After heat treatment, the ultimate tensile strength of the material slightly decreases, but the elongation significantly increases. As the annealing temperature increased, the elongation (EL) improved from 5.22% to 11.43%. Following high-temperature annealing at 800 °C, necking and larger dimples appear on the fracture surface, and the fracture mechanism shifts from a mixed brittle–ductile fracture to a ductile fracture. This work provides a theoretical basis for improving the microstructures and properties of SLM-fabricated TC4 alloys through heat treatment.

Schlagwörter

Stichwörter der Autor:innen

TC4 alloyannealing heat treatmentmechanical propertiesmicrostructureselective laser melting (SLM)

Autor:innen und Institutionen

  • College of Mechanical & Electrical Engineering, Jining University, Jining 273155, China.
  • College of Mechanical & Electrical Engineering, Wenzhou University, Wenzhou 325006, China.

ORCID-Profile: Shengdong Zhang, Xiaoming Pan

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Zhang, J., Shi, Y., Shen, S., Zhang, S., Ding, H., & Pan, X. (2025). Effect of Heat Treatment on Microstructures and Mechanical Properties of TC4 Alloys Prepared by Selective Laser Melting. Materials, 18(17), 4126. https://doi.org/10.3390/ma18174126

Vancouver

Zhang J, Shi Y, Shen S, Zhang S, Ding H, Pan X. Effect of Heat Treatment on Microstructures and Mechanical Properties of TC4 Alloys Prepared by Selective Laser Melting. Materials. 2025;18(17):4126. doi:10.3390/ma18174126

BibTeX
@article{Zhang2025,
  author = {Zhang, Jian and Shi, Yuhuan and Shen, Su and Zhang, Shengdong and Ding, Honghui and Pan, Xiaoming},
  title = {Effect of Heat Treatment on Microstructures and Mechanical Properties of TC4 Alloys Prepared by Selective Laser Melting},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4126},
  doi = {10.3390/ma18174126}
}
Kostenlos starten →