Research on the Adhesion Performance of Fast-Melting SBS-Modified Emulsified Asphalt–Aggregate Based on the Surface Free Energy Theory
Materials · 27.07.2025 · 18 (15) · 3523
DOI: 10.3390/ma18153523 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.07.2025. Verfasst von Hao Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Xinyang Normal University, Xinyang 464000, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Henan Housing and Urban-Rural Development.
Abstract (Originalsprache)
Aiming at the problems of complex process flow, high energy consumption, and difficult emulsification in the preparation of traditional SBS-modified emulsified asphalt, a preparation method of fast-melting SBS (referred to as SBS-T) modified emulsified asphalt based on the integration of modification and emulsification is proposed. Based on surface free energy theory, the contact angles between three rapid-melting SBS-modified emulsified asphalts with different dosages and three probe liquids (deionized water, glycerol, and formamide) were measured using the sessile drop method. The adhesion performance of the asphalt–aggregate system was studied by means of micromechanical methods. The evaluation indicators such as the cohesion work of the emulsified asphalt, the adhesion work of asphalt–aggregate, the spalling work, and the energy ratio were analyzed. The results show that the SBS-T modifier can significantly improve the thermodynamic properties of emulsified asphalt. With increasing modifier content, the SBS-T-modified emulsified asphalt demonstrated enhanced cohesive work, improved asphalt–aggregate adhesive work, and increased energy ratio, while showing reduced stripping work. At equivalent dosage levels, the SBS-T-modified emulsified asphalt demonstrates a slight improvement in adhesion performance to aggregates compared to conventional SBS-modified emulsified asphalt. The SBS-T emulsified modified asphalt provides an effective technical solution for the preventive maintenance of asphalt pavements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Architecture and Civil Engineering, Xinyang Normal University, Xinyang 464000, China.
- School of Software, Henan Normal University, Xinxiang 453000, China.
- School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450000, China.
Förderung
- Science and Technology Program of Henan Housing and Urban-Rural Development
Zitieren
APA
Zhang, H., Li, H., Guo, F., Wang, S., & Yue, J. (2025). Research on the Adhesion Performance of Fast-Melting SBS-Modified Emulsified Asphalt–Aggregate Based on the Surface Free Energy Theory. Materials, 18(15), 3523. https://doi.org/10.3390/ma18153523
Vancouver
Zhang H, Li H, Guo F, Wang S, Yue J. Research on the Adhesion Performance of Fast-Melting SBS-Modified Emulsified Asphalt–Aggregate Based on the Surface Free Energy Theory. Materials. 2025;18(15):3523. doi:10.3390/ma18153523
BibTeX
@article{Zhang2025,
author = {Zhang, Hao and Li, Haowei and Guo, Fei and Wang, Shige and Yue, Jinchao},
title = {Research on the Adhesion Performance of Fast-Melting SBS-Modified Emulsified Asphalt–Aggregate Based on the Surface Free Energy Theory},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3523},
doi = {10.3390/ma18153523}
}
EUVIMED