EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Rheological Study of the High-Temperature Properties of Fast-Melting SBS/Epoxy-Modified Asphalt Binders

Lei Feng, Xinyong Zhang, Tianyu Sha, Decai Wang, Ben Niu, Riran Wang, Xiyang Hou

Polymers · 22.02.2025 · 17 (5) · 581

DOI: 10.3390/polym17050581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.02.2025. Verfasst von Lei Feng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Taihang Urban and Rural Construction Group Co., Ltd., 569 Shitong Rd., Shijiazhuang 050200, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A fast-melting epoxy resin styrene–butadiene–styrene composite modifier (ER-SBS-T) was utilized for the rapid modification of an asphalt binder. The effect of this novel fast-melting modifier on high-temperature performance is not supported by any pertinent investigations. First, the penetration, softening points, and 60 °C kinematic viscosity of the asphalt samples were tested. In addition, these asphalt samples were subjected to multiple stress creep recovery (MSCR) tests to assess the ability to recover from creep and to test the high-temperature performance of the asphalt binder. The study then compared different models based on the zero-shear viscosity (ZSV) test. The research shows that the use of ER-SBS-T composite modifiers significantly improves the high-temperature performance of asphalt binder. The high-temperature performance of fast-melting SBS-T-modified asphalt binder is comparable to that of SBS-modified asphalt binder. The high-temperature performance of the asphalt binder can still be significantly improved when the amount of ER-SBS-T composite modifier exceeds 6%. For the high-temperature performance grading of the ER-SBS-T composite-modified asphalt binder, a reference temperature of 70 °C can be established. The results also demonstrate that the Cross rheological model is more suitable for determining the zero-shear viscosity of the ER-SBS-T composite-modified asphalt binder.

Schlagwörter

Stichwörter der Autor:innen

asphalt binderepoxy resinhigh-temperature performancenovel fast-melting modifierrheological model

Autor:innen und Institutionen

  • Taihang Urban and Rural Construction Group Co., Ltd., 569 Shitong Rd., Shijiazhuang 050200, China.
  • School of Water Conservancy and Transportation, Zhengzhou University, 100 Science Rd., Zhengzhou 450001, China.
  • School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou 450045, China.

Zitieren

APA

Feng, L., Zhang, X., Sha, T., Wang, D., Niu, B., Wang, R., & Hou, X. (2025). A Rheological Study of the High-Temperature Properties of Fast-Melting SBS/Epoxy-Modified Asphalt Binders. Polymers, 17(5), 581. https://doi.org/10.3390/polym17050581

Vancouver

Feng L, Zhang X, Sha T, Wang D, Niu B, Wang R, et al. A Rheological Study of the High-Temperature Properties of Fast-Melting SBS/Epoxy-Modified Asphalt Binders. Polymers. 2025;17(5):581. doi:10.3390/polym17050581

BibTeX
@article{Feng2025,
  author = {Feng, Lei and Zhang, Xinyong and Sha, Tianyu and Wang, Decai and Niu, Ben and Wang, Riran and Hou, Xiyang},
  title = {A Rheological Study of the High-Temperature Properties of Fast-Melting SBS/Epoxy-Modified Asphalt Binders},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {581},
  doi = {10.3390/polym17050581}
}
Kostenlos starten →