Influence of In Situ Polymerization on the Compressive Strength of Scots Pine (Pinus sylvestris L.) Recovered from Demolition Timber and Two Forest-Sourced Species: European Beech (Fagus sylvatica) and Black Alder (Alnus glutinosa)
Materials · 22.07.2025 · 18 (15) · 3439
DOI: 10.3390/ma18153439 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.07.2025. Verfasst von Emil Żmuda und 1 weiteren Autor:innen. Beteiligte Einrichtung: Warsaw University of Life Sciences-SGGW, Department of Wood Science and Wood Protection, 159 Nowoursynowska, 02-787 Warszawa, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Development Fund of the Warsaw University of Life Sciences–SGGW.
Abstract (Originalsprache)
This study investigated the effect of in situ polymerization on the compressive strength of demolition-derived Scots pine, European beech, and black alder wood. The treatment applied was based on previously confirmed in situ polymerization systems in wood, which are known to lead to polymer formation and composite-like structures. In this study, we assumed similar behavior and focused on a mechanical evaluation of the modified wood. Three different polymer systems were applied to evaluate differences in performance. After modification, the compressive strength levels increased by 60% in beech, 119% in alder, and 150% in pine, with corresponding increases in density and weight percent gain (WPG). The highest relative improvement was observed in the least dense species, pine. The findings suggest that polymer treatment can significantly enhance the mechanical properties, likely due to the incorporation of polymer into the wood matrix; however, this inference is based on indirect physical evidence.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Warsaw University of Life Sciences-SGGW, Department of Wood Science and Wood Protection, 159 Nowoursynowska, 02-787 Warszawa, Poland.
- Warsaw University of Life Sciences-SGGW, Institute of Wood Sciences and Furniture, Department of Technology and Entrepreneurship in the Wood Industry, 159 Nowoursynowska, 02-787 Warszawa, Poland.
ORCID-Profile: Emil Żmuda, Kamil Roman
Förderung
- Science Development Fund of the Warsaw University of Life Sciences–SGGW
Zitieren
APA
Żmuda, E., & Roman, K. (2025). Influence of In Situ Polymerization on the Compressive Strength of Scots Pine (Pinus sylvestris L.) Recovered from Demolition Timber and Two Forest-Sourced Species: European Beech (Fagus sylvatica) and Black Alder (Alnus glutinosa). Materials, 18(15), 3439. https://doi.org/10.3390/ma18153439
Vancouver
Żmuda E, Roman K. Influence of In Situ Polymerization on the Compressive Strength of Scots Pine (Pinus sylvestris L.) Recovered from Demolition Timber and Two Forest-Sourced Species: European Beech (Fagus sylvatica) and Black Alder (Alnus glutinosa). Materials. 2025;18(15):3439. doi:10.3390/ma18153439
BibTeX
@article{muda2025,
author = {Żmuda, Emil and Roman, Kamil},
title = {Influence of In Situ Polymerization on the Compressive Strength of Scots Pine (Pinus sylvestris L.) Recovered from Demolition Timber and Two Forest-Sourced Species: European Beech (Fagus sylvatica) and Black Alder (Alnus glutinosa)},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3439},
doi = {10.3390/ma18153439}
}
EUVIMED