EUVIMEDEUVIMED entdecken
Crossref

Effects of Some Machining Parameters on Cutting Power in CNC Milling of Oriental Beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods

Ali Cakmak

Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi · 30.10.2026 · 27 (4) · 1-14

DOI: 10.17474/artvinofd.1989109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, online erschienen am 30.10.2026. Verfasst von Ali Cakmak. Die Arbeit nennt 47 Literaturangaben. Gefördert von: TUBITAK.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focused on the influence of machining parameters and wood properties on cutting power in the CNC milling of Oriental beech and Scots pine. The results indicated that the statistical models were highly significant (p < 0.001) with explanatory powers of 82.5% for Oriental beech and 87.2% for Scots pine. The cutting power of Oriental beech was greater than that of Scots pine because of the higher density and compact structure of Oriental beech. The order of importance of the machining parameters on the cutting power was spindle speed, depth of cut, feed rate, and cutting direction for both species, respectively. Width of cut had a greater effect on Scots pine than on Oriental beech. The species-specific machining behavior was observed between Oriental beech and Scots pine, and cutting power generally increased with increasing spindle speed, feed rate, and depth of cut. There were significant interactions between the machining parameters, especially feed rate × depth of cut and spindle speed × width of cut, which suggested that the machining parameters should be optimized as a whole instead of individually. Therefore, the findings of this study could help to select suitable cutting conditions and maintain the sharpness of cutting tools to reduce energy consumption, improve machining quality, and develop sustainable wood manufacturing.

Förderung

  • TUBITAK

Zitieren

APA

Cakmak, A. (2026). Effects of Some Machining Parameters on Cutting Power in CNC Milling of Oriental Beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, 27(4), 1-14. https://doi.org/10.17474/artvinofd.1989109

Vancouver

Cakmak A. Effects of Some Machining Parameters on Cutting Power in CNC Milling of Oriental Beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi. 2026;27(4):1-14. doi:10.17474/artvinofd.1989109

BibTeX
@article{Cakmak2026,
  author = {Cakmak, Ali},
  title = {Effects of Some Machining Parameters on Cutting Power in CNC Milling of Oriental Beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods},
  journal = {Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi},
  year = {2026},
  volume = {27},
  number = {4},
  pages = {1--14},
  doi = {10.17474/artvinofd.1989109}
}
Kostenlos starten →