EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Grain Boundary Structure and Dielectric Properties in SrTiO3 Ceramics via Hot Isostatic Pressing

Yilong Feng iD, Zhenya Lu iD, Ming Lv iD, Dan Qie iD, Zaiyun Long

Materials · 13.07.2025 · 18 (14) · 3301

DOI: 10.3390/ma18143301 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.07.2025. Verfasst von Yilong Feng und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study fabricated SrTiO3 grain boundary layer ceramics using hot isostatic pressing (HIP), achieving a remarkably high dielectric constant of 60,350 and a superior breakdown strength of 1722 kV/m. Microstructural characterization via scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that HIP treatment significantly refined grain size uniformity and homogenized bismuth distribution at grain boundaries, thus enhancing the interfacial barrier effect. Probe-based impedance spectroscopy elucidated the dielectric behavior and conduction mechanisms of individual grain boundaries. HIP promotes the formation of interfacial barrier layers (IBLs), significantly improving electrical performance. Compared to untreated samples (average breakdown strength: 555 kV/m), HIP-processed ceramics exhibited a threefold enhancement in breakdown strength (1722 kV/m). The treated ceramic exhibited excellent temperature stability, with TCC ≤8% over −55 to 125 °C. The optimized dielectric properties stem from HIP-induced structural modifications, including reduced oxygen vacancy concentrations and homogenized electronic distribution at grain boundaries. These findings establish a quantitative correlation between HIP parameters, grain boundary restructuring, and macroscopic performance, providing critical insights for designing high-energy-density dielectric materials.

Schlagwörter

Stichwörter der Autor:innen

dielectric propertiesgrain boundary layer ceramicshot isostatic pressurestrontium titanate

Autor:innen und Institutionen

  • School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.
  • Aurora Technologies Co., Ltd., Guangzhou 510640, China.

ORCID-Profile: Yilong Feng, Zhenya Lu, Ming Lv, Dan Qie

Zitieren

APA

Feng, Y., Lu, Z., Lv, M., Qie, D., & Long, Z. (2025). Optimization of Grain Boundary Structure and Dielectric Properties in SrTiO3 Ceramics via Hot Isostatic Pressing. Materials, 18(14), 3301. https://doi.org/10.3390/ma18143301

Vancouver

Feng Y, Lu Z, Lv M, Qie D, Long Z. Optimization of Grain Boundary Structure and Dielectric Properties in SrTiO3 Ceramics via Hot Isostatic Pressing. Materials. 2025;18(14):3301. doi:10.3390/ma18143301

BibTeX
@article{Feng2025,
  author = {Feng, Yilong and Lu, Zhenya and Lv, Ming and Qie, Dan and Long, Zaiyun},
  title = {Optimization of Grain Boundary Structure and Dielectric Properties in SrTiO3 Ceramics via Hot Isostatic Pressing},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3301},
  doi = {10.3390/ma18143301}
}
Kostenlos starten →