EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Mechanical Properties of European Oak and Norway Spruce Clear Wood

Serena Gambarelli iD, Josipa Bošnjak iD, Rey Noé Fararoni Platas iD, Kexin Jin

Materials · 10.07.2025 · 18 (14) · 3257

DOI: 10.3390/ma18143257 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.07.2025. Verfasst von Serena Gambarelli und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Testing Institute, University of Stuttgart, 70569 Stuttgart, Germany. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Baden-Württemberg Stiftung, Deutsche Forschungsgemeinschaft, BW Stiftung (Baden-Württemberg Foundation).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The trends in the building industry related to sustainability and environmental footprint make timber structures more appealing than ever. Many challenges in understanding the behaviour of structural timber can be addressed by combining experimental and numerical methods. However, sophisticated numerical tools require a complete description of the behaviour at the material level. Even though there are vast databases on the properties of different species, there are only limited studies on the mechanical response with complete stress–strain curves for all relevant directions. In order to bridge this gap, the present study investigates the mechanical response of European oak (hardwood) and Norway spruce (softwood). Uniaxial tensile and compressive tests were performed on small clear wood specimens. The behaviour was investigated for the direction parallel (longitudinal) and perpendicular to the grain (radial and tangential). Both species exhibit brittle tensile behaviour in all material directions, in contrast to the ductile performance under compression. The tensile strength lies at 70 MPa and 80 MPa for spruce and oak, respectively, whereas both species exhibit a compressive strength of approximately 50 MPa in the longitudinal direction. Due to the narrow range of the investigated density, growth-ring angle and growth-ring width, only a limited effect of these parameters was observed on the tensile behaviour in the longitudinal direction.

Schlagwörter

Stichwörter der Autor:innen

clear woodfailure modeorthotropic behavioursoftwood and hardwoodstress–strain curvesuniaxial behaviour

Autor:innen und Institutionen

  • Materials Testing Institute, University of Stuttgart, 70569 Stuttgart, Germany.

ORCID-Profile: Serena Gambarelli, Josipa Bošnjak, Rey Noé Fararoni Platas

Förderung

  • Baden-Württemberg Stiftung
  • Deutsche Forschungsgemeinschaft
  • BW Stiftung (Baden-Württemberg Foundation)

Zitieren

APA

Gambarelli, S., Bošnjak, J., Fararoni Platas, R. N., & Jin, K. (2025). Experimental Study on Mechanical Properties of European Oak and Norway Spruce Clear Wood. Materials, 18(14), 3257. https://doi.org/10.3390/ma18143257

Vancouver

Gambarelli S, Bošnjak J, Fararoni Platas RN, Jin K. Experimental Study on Mechanical Properties of European Oak and Norway Spruce Clear Wood. Materials. 2025;18(14):3257. doi:10.3390/ma18143257

BibTeX
@article{Gambarelli2025,
  author = {Gambarelli, Serena and Bošnjak, Josipa and Fararoni Platas, Rey Noé and Jin, Kexin},
  title = {Experimental Study on Mechanical Properties of European Oak and Norway Spruce Clear Wood},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3257},
  doi = {10.3390/ma18143257}
}
Kostenlos starten →