EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wood Material Properties of Forest Fire-Damaged Norway Spruce and Scots Pine for Mechanical Wood Processing in Finland

Juhani Marttila, Veikko Möttönen, Antti Haapala, Pekka Ylimäki, Petri Kilpeläinen, Erkki Verkasalo

Applied Sciences · 27.12.2023 · 14 (1) · 238

DOI: 10.3390/app14010238 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.12.2023. Verfasst von Juhani Marttila und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Puumiesten ammattikasvatussäätiö, Luke’s strategic project PosFibes, Pyhäjoen Puu Oy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to climate change, the risk of forest fires has increased in Europe, resulting in challenges in the allocation of salvaged wood. We studied the raw material potential for wood products of Norway spruce and Scots pine sawn log trees that remained standing after a large forest fire in Kalajoki, Finland, in July 2021. Eight burned trees, with four reference trees per species, were sampled as standard specimens, and measurements were analyzed with linear mixed models. The effects of fire on the modulus of elasticity and rupture, Brinell hardness, moisture gradient, and color were measured on clear wood specimens of sapwood and heartwood. The wood density, level of fire damage, and height location of a tree were used as additional predictors. The results show some changes in the sapwood material. Spruce wood underwent stronger changes after the fire than pine wood, probably due to spruce wood having a thinner bark and a longer crown. The moisture content decreased in spruce, and the color darkened in both spruce and pine. Changes in the mechanical properties were mostly negligible, but a small increase in the Brinell hardness in spruce and a small decrease in the modulus of rupture in pine were observed. Fresh salvaged wood can be a suitable material for middle-quality and lower-quality wood products. The spread of char and soot into wood and wood processing machinery still limits its usage, especially for spruce.

Förderung

  • Puumiesten ammattikasvatussäätiö
  • Luke’s strategic project PosFibes
  • Pyhäjoen Puu Oy

Zitieren

APA

Marttila, J., Möttönen, V., Haapala, A., Ylimäki, P., Kilpeläinen, P., & Verkasalo, E. (2023). Wood Material Properties of Forest Fire-Damaged Norway Spruce and Scots Pine for Mechanical Wood Processing in Finland. Applied Sciences, 14(1), 238. https://doi.org/10.3390/app14010238

Vancouver

Marttila J, Möttönen V, Haapala A, Ylimäki P, Kilpeläinen P, Verkasalo E. Wood Material Properties of Forest Fire-Damaged Norway Spruce and Scots Pine for Mechanical Wood Processing in Finland. Applied Sciences. 2023;14(1):238. doi:10.3390/app14010238

BibTeX
@article{Marttila2023,
  author = {Marttila, Juhani and Möttönen, Veikko and Haapala, Antti and Ylimäki, Pekka and Kilpeläinen, Petri and Verkasalo, Erkki},
  title = {Wood Material Properties of Forest Fire-Damaged Norway Spruce and Scots Pine for Mechanical Wood Processing in Finland},
  journal = {Applied Sciences},
  year = {2023},
  volume = {14},
  number = {1},
  pages = {238},
  doi = {10.3390/app14010238}
}
Kostenlos starten →