EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Degradation and Flame Resistance Mechanism of Phosphorous-Based Flame Retardant of ABS Composites Used in 3D Printing Technology

Rafał Oliwa iD, Katarzyna Bulanda iD, Mariusz Oleksy iD

Materials · 07.07.2025 · 18 (13) · 3202

DOI: 10.3390/ma18133202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2025. Verfasst von Rafał Oliwa und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry, Department of Polymer Composites, Rzeszow University of Technology, Al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Financed by the Minister of Science and Higher Education Republic of Poland within the program "Regional Excellence Initiative", agreement no. RID/SP/0032/2024…, Minister of Science and Higher Education Republic of Poland within the program “Regional Excellence Initiative”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As part of the work, polymer composites dedicated to rapid prototyping were developed, especially for 3D printing using the material extrusion technique. For this purpose, a polymer matrix was selected, which was an acrylonitrile-butadiene-styrene (ABS) terpolymer and a flame retardant, which was tetrakis (2,6-dimethylphenyl)-m-phenylenebisphosphate, commercially known as PX200. The effect of the presence and amount (5, 10, 15 and 20 wt.%) of the introduced additive on the rheological properties, structural properties, flammability (limiting oxygen index, LOI; UL94) and flame retardant properties (microcone calorimeter, MLC) of ABS-based composites was investigated. In addition, the mechanism of thermal degradation and flame resistance was investigated using thermogravimetric analysis, TGA and Fourier transform infrared spectroscopy, FT-IR of the residue after the MLC test. In the first part of the work, using the author’s technological line, filaments were obtained from unfilled ABS and its composites. Samples for testing were obtained by 3D printing in Fused Deposition Modeling (FDM) technology. In order to determine the quantitative and qualitative spread of fire and the effectiveness of the phosphorus flame retardant PX200 in the produced composites, the Maximum Average Rate of Heat Emission (MARHE); Fire Growth Rate Index (FIGRA); Fire Potential Index (FPI) and Flame Retardancy Index (FRI) were determined. Based on the obtained results, it was found that the aryl biphosphate used in this work exhibits activity in the gas phase, which was confirmed by quantitative assessment using data from a microcone calorimeter and non-residues after combustion and thermolysis at 700 °C. As a result, the flammability class did not change (HB40), and the LOI slightly increased to 20% for the composite with 20% flame retardant content. Moreover, this composite was characterized by the following flammability indices: pHRR = 482.9 kW/m2 (−40.3%), MARHE = 234 kW/m2 (−40.7%), FIGRA = 3.1 kW/m2·s (−56.3%), FPI = 0.061 m2·s/kW (+64.9%), FRI = 2.068 (+106.8%).

Schlagwörter

Stichwörter der Autor:innen

ABSFDMaryl phosphate flame retardantflame resistancethermal stability

Autor:innen und Institutionen

  • Faculty of Chemistry, Department of Polymer Composites, Rzeszow University of Technology, Al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland.

ORCID-Profile: Rafał Oliwa, Katarzyna Bulanda, Mariusz Oleksy

Förderung

  • Financed by the Minister of Science and Higher Education Republic of Poland within the program "Regional Excellence Initiative", agreement no. RID/SP/0032/2024…
  • Minister of Science and Higher Education Republic of Poland within the program “Regional Excellence Initiative”

Zitieren

APA

Oliwa, R., Bulanda, K., & Oleksy, M. (2025). Thermal Degradation and Flame Resistance Mechanism of Phosphorous-Based Flame Retardant of ABS Composites Used in 3D Printing Technology. Materials, 18(13), 3202. https://doi.org/10.3390/ma18133202

Vancouver

Oliwa R, Bulanda K, Oleksy M. Thermal Degradation and Flame Resistance Mechanism of Phosphorous-Based Flame Retardant of ABS Composites Used in 3D Printing Technology. Materials. 2025;18(13):3202. doi:10.3390/ma18133202

BibTeX
@article{Oliwa2025,
  author = {Oliwa, Rafał and Bulanda, Katarzyna and Oleksy, Mariusz},
  title = {Thermal Degradation and Flame Resistance Mechanism of Phosphorous-Based Flame Retardant of ABS Composites Used in 3D Printing Technology},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {3202},
  doi = {10.3390/ma18133202}
}
Kostenlos starten →