EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of Cu-Containing Substances via an Ultrasonic-Assisted Solvothermal Approach and Their Catalytic Effects on the Thermal Decomposition of Ammonium Perchlorate

Cheng-Hsiung Peng iD, Pin-Hsien Su, Jin-Shuh Li iD, Yan-Jun Ke

Materials · 20.06.2025 · 18 (13) · 2928

DOI: 10.3390/ma18132928 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.06.2025. Verfasst von Cheng-Hsiung Peng und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Materials Science and Technology, Minghsin University of Science and Technology, Hsinchu 304, Taiwan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Chun-Shan Institute of Science and Technology of R.O.C. (Taiwan), National Chung-Shan Institute of Science and Technology of R.O.C. (Taiwan).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a one-pot, ultrasonic-assisted solvothermal method was successfully employed to prepare three copper-containing compounds: copper benzene-1,3,5-tricarboxylate (Cu3(BTC)2), copper powder, and copper-metalized activated carbon (Cu@AC). This method is efficient and safe and has potential for use in scalable production. The characteristics of the resulting products were analyzed using various techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area measurement along with pore size distribution, and thermogravimetric analysis–differential scanning calorimetry (TG-DSC). Additionally, the catalytic effects of these products on the thermal decomposition of ammonium perchlorate (AP) were evaluated. All three substances were found to lower the thermal decomposition temperature of AP and enhance heat release. Cu3(BTC)2 demonstrated exceptional catalytic performance and compatibility with AP, as shown using the vacuum stability test (VST). The thermal analysis results indicated that the thermal decomposition temperature and apparent activation energy of AP decreased from ~442 °C to around 340 °C and from ~207 kJ mol−1 to approximately 128 kJ mol−1, respectively, when 3 wt% Cu3(BTC)2 was contained in AP. Moreover, the heat released via the exothermic decomposition of AP increased from 740 J g−1 to1716 J g−1. A possible reaction mechanism is proposed based on the evolved gas analysis (EGA) findings to explain the observed catalytic effects.

Schlagwörter

Stichwörter der Autor:innen

ammonium perchloratecatalysiscopper benzene-1,3,5-tricarboxylatesolvothermalultrasonic-assisted method

Autor:innen und Institutionen

  • Department of Applied Materials Science and Technology, Minghsin University of Science and Technology, Hsinchu 304, Taiwan.
  • Department of Chemical and Materials Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan 335, Taiwan.

ORCID-Profile: Cheng-Hsiung Peng, Jin-Shuh Li

Förderung

  • National Chun-Shan Institute of Science and Technology of R.O.C. (Taiwan)
  • National Chung-Shan Institute of Science and Technology of R.O.C. (Taiwan)

Zitieren

APA

Peng, C. H., Su, P. H., Li, J. S., & Ke, Y. J. (2025). Preparation of Cu-Containing Substances via an Ultrasonic-Assisted Solvothermal Approach and Their Catalytic Effects on the Thermal Decomposition of Ammonium Perchlorate. Materials, 18(13), 2928. https://doi.org/10.3390/ma18132928

Vancouver

Peng CH, Su PH, Li JS, Ke YJ. Preparation of Cu-Containing Substances via an Ultrasonic-Assisted Solvothermal Approach and Their Catalytic Effects on the Thermal Decomposition of Ammonium Perchlorate. Materials. 2025;18(13):2928. doi:10.3390/ma18132928

BibTeX
@article{Peng2025,
  author = {Peng, Cheng-Hsiung and Su, Pin-Hsien and Li, Jin-Shuh and Ke, Yan-Jun},
  title = {Preparation of Cu-Containing Substances via an Ultrasonic-Assisted Solvothermal Approach and Their Catalytic Effects on the Thermal Decomposition of Ammonium Perchlorate},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {2928},
  doi = {10.3390/ma18132928}
}
Kostenlos starten →