EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Catalytic Performance of Porous Cu/Cu2O Synthesized by One-Step Solvothermal Method for Thermal Decomposition of Ammonium Perchlorate

Bo Yang, Xiang Yang, Minghong Long, Yanzhi Yang, Xuechun Xiao

Chemistry · 06.02.2026 · 8 (2) · 18

DOI: 10.3390/chemistry8020018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemistry, online erschienen am 06.02.2026. Verfasst von Bo Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Undergraduate Innovation Training Program of Yunnan University, Science and Technology Plan Project of Zhejiang Province, “Scientific Research Fund of Yunnan Provincial Department of Education”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous Cu/Cu2O catalytic materials with a unique pore structure were successfully synthesized via a one-step solvothermal method using Cu-MOF-74 as the intermediate, followed by induced collapse and oxidation. The structural properties and catalytic performance of the as-prepared Cu/Cu2O materials in the thermal decomposition of ammonium perchlorate (AP) were systematically investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis, and thermogravimetry–differential scanning calorimetry (TG-DSC) combined with in situ thermogravimetry–mass spectrometry (TG-MS). The results show that the specific surface area of the Cu/Cu2O material is 46.6697 m2/g, and the average pore diameter is 9.4608 nm. Owing to the synergistic effect of Cu0/Cu+ dual sites on promoting electron transfer during AP thermal decomposition, the Cu/Cu2O catalyst exhibits excellent catalytic activity. Specifically, at a heating rate of 20 °C/min, the addition of 2 wt% Cu/Cu2O reduces the high-temperature decomposition temperature of AP from 473.1 °C to 321.1 °C (a decrease of 151.0 °C), lowers the thermal decomposition activation energy from 296.63 kJ/mol to 253.21 kJ/mol (a reduction of 43.42 kJ/mol), and increases the heat release by 617.8 J/g compared to pure AP. TG-MS analysis revealed that Cu/Cu2O accelerates the decomposition of AP by adsorbing and activating NH3 and HClO4 generated in the low-temperature decomposition stage, facilitating the formation of reactive intermediates such as ClOₓ and promoting the oxidation of nitrogen-containing species. This study demonstrates that the porous Cu/Cu2O material synthesized by the one-step solvothermal method is a promising catalyst for enhancing the thermal decomposition performance of AP in solid propellants.

Förderung

  • Undergraduate Innovation Training Program of Yunnan University
  • Science and Technology Plan Project of Zhejiang Province
  • “Scientific Research Fund of Yunnan Provincial Department of Education”
  • “Graduate Student Research Innovation Fund of Yunnan University”

Zitieren

APA

Yang, B., Yang, X., Long, M., Yang, Y., & Xiao, X. (2026). Study on the Catalytic Performance of Porous Cu/Cu2O Synthesized by One-Step Solvothermal Method for Thermal Decomposition of Ammonium Perchlorate. Chemistry, 8(2), 18. https://doi.org/10.3390/chemistry8020018

Vancouver

Yang B, Yang X, Long M, Yang Y, Xiao X. Study on the Catalytic Performance of Porous Cu/Cu2O Synthesized by One-Step Solvothermal Method for Thermal Decomposition of Ammonium Perchlorate. Chemistry. 2026;8(2):18. doi:10.3390/chemistry8020018

BibTeX
@article{Yang2026,
  author = {Yang, Bo and Yang, Xiang and Long, Minghong and Yang, Yanzhi and Xiao, Xuechun},
  title = {Study on the Catalytic Performance of Porous Cu/Cu2O Synthesized by One-Step Solvothermal Method for Thermal Decomposition of Ammonium Perchlorate},
  journal = {Chemistry},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {18},
  doi = {10.3390/chemistry8020018}
}
Kostenlos starten →