Multi-Objective Optimization of Thin-Walled Connectors in Injection Molding Process Based on Integrated Algorithms
Materials · 28.04.2025 · 18 (9) · 1991
DOI: 10.3390/ma18091991 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.04.2025. Verfasst von Size Peng und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha 410082, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
For the manufacturing of thin-walled connectors, warpage represents an inherent challenge in injection molding, significantly affecting dimensional accuracy and shape consistency. This study introduces an optimization methodology that combines Latin Hypercube Sampling (LHS), numerical simulation, a DBO-BP neural network prediction model, and integrated multi-objective optimization algorithms (NSGA-II). Initially, LHS is employed to select experimental sample points, followed by numerical simulations to evaluate the influence of process parameters on the response variables. Based on the simulation outcomes and response data, a DBO-BP neural network prediction model is developed to enhance the precision of multi-objective optimization. Subsequently, the NSGA-II algorithm is utilized for multi-objective optimization to analyze the effects of various process parameter combinations on warpage, shrinkage, and clamping force, ultimately identifying the optimal Pareto front solutions. The optimization results demonstrate that the model’s prediction accuracy for warpage and volume shrinkage is within 5%. The clamping force remains relatively high, with the optimal values for warpage, volume shrinkage rate, and clamping force being 0.173 mm, 7.5%, and 15.83 tons, respectively. This approach facilitates the optimization of injection molding process parameters while ensuring the quality of thin-walled connectors, thereby improving production efficiency and minimizing defects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha 410082, China.
- Tianjin Key Laboratory of Aquatic Science and Technology, School of Environmental and Municipal Engineering, Tianjin Chengjian University, Tianjin 300384, China.
ORCID-Profile: Daohong Zhang, Maojun Li
Zitieren
APA
Peng, S., Tan, M., Zhang, D., & Li, M. (2025). Multi-Objective Optimization of Thin-Walled Connectors in Injection Molding Process Based on Integrated Algorithms. Materials, 18(9), 1991. https://doi.org/10.3390/ma18091991
Vancouver
Peng S, Tan M, Zhang D, Li M. Multi-Objective Optimization of Thin-Walled Connectors in Injection Molding Process Based on Integrated Algorithms. Materials. 2025;18(9):1991. doi:10.3390/ma18091991
BibTeX
@article{Peng2025,
author = {Peng, Size and Tan, Mingbo and Zhang, Daohong and Li, Maojun},
title = {Multi-Objective Optimization of Thin-Walled Connectors in Injection Molding Process Based on Integrated Algorithms},
journal = {Materials},
year = {2025},
volume = {18},
number = {9},
pages = {1991},
doi = {10.3390/ma18091991}
}
EUVIMED