Multi-Objective Optimization of Injection Molding Parameters for Manufacturing Thin-Walled Composite Connector Terminals
Materials · 08.08.2024 · 17 (16) · 3949
DOI: 10.3390/ma17163949 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.08.2024. Verfasst von Mingbo Tan und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha 410082, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The rapid development of new energy vehicles demands significant improvements in connector structures and performance standards. Wire harness connectors, crucial for linking various electrical components, face challenges due to their small size and thin-walled structure, which can lead to dimensional shrinkage and warping during injection molding. To address these issues, this study optimizes the injection molding process by fine-tuning parameters such as melt temperature, mold temperature, injection time, holding pressure/time, and cooling time. By integrating the Taguchi method with grey relational analysis, the study enhances the molding process for thin-walled composite connectors. This combined approach provides a comprehensive framework for optimizing multiple quality objectives and improving the overall performance of injection-molded composite components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha 410082, China.
- Hunan Xingtu Aerospace and Spacecraft Manufacturing Co., Ltd., Zhuzhou 412000, China.
- Yangzhou Pinghang Aerodynamics Technology Co., Ltd., Yangzhou 225200, China.
ORCID-Profile: Maojun Li
Zitieren
APA
Tan, M., Peng, S., Huo, Y., & Li, M. (2024). Multi-Objective Optimization of Injection Molding Parameters for Manufacturing Thin-Walled Composite Connector Terminals. Materials, 17(16), 3949. https://doi.org/10.3390/ma17163949
Vancouver
Tan M, Peng S, Huo Y, Li M. Multi-Objective Optimization of Injection Molding Parameters for Manufacturing Thin-Walled Composite Connector Terminals. Materials. 2024;17(16):3949. doi:10.3390/ma17163949
BibTeX
@article{Tan2024,
author = {Tan, Mingbo and Peng, Size and Huo, Yingfei and Li, Maojun},
title = {Multi-Objective Optimization of Injection Molding Parameters for Manufacturing Thin-Walled Composite Connector Terminals},
journal = {Materials},
year = {2024},
volume = {17},
number = {16},
pages = {3949},
doi = {10.3390/ma17163949}
}
EUVIMED