Anisotropic Conductivity and Mechanical Strength Enhancements in Gel Polymer Electrolyte Films by Hot Pressing
Materials · 11.04.2025 · 18 (8) · 1751
DOI: 10.3390/ma18081751 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.04.2025. Verfasst von Zhifan Fang und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Material Science & Engineering, Nanjing Tech University, Nanjing 210009, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).
Abstract (Originalsprache)
Gel polymer electrolyte (GPE) with a polymer matrix swollen in liquid electrolytes offers several advantages over conventional liquid electrolytes, including no leakage, lightweight properties, and high reliability. While poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based GPEs show promise for lithium-ion batteries, their practical application is hindered by the intrinsic trade-off between ionic conductivity and mechanical robustness in conventional PVDF systems. Typical strategies relying on excessive plasticizers (e.g., ionic liquids) compromise mechanical integrity. Here, we propose a novel hot-pressing-induced recrystallization strategy to synergistically enhance both anisotropic ionic conductivity and puncture strength in PVDF-based GPE films. By blending PVDF with controlled amounts of 1-hexyl-3-methylimidazolium chloride ([HMIM]Cl), followed by solution casting and hot pressing, we achieve microstructural reorganization that dramatically improves through-thickness ion transport and mechanical performance. Crucially, hot-pressed PVDF with only 25 wt% [HMIM]Cl exhibits a 12.5-fold increase in ionic conductivity (reaching 4.7 × 10−4 S/cm) compared to its solution-cast counterparts. Remarkably, this formulation surpasses the conductivity of PVDF-HFP composites with a higher [HMIM]Cl content (35 wt%, 1.7 × 10−4 S/cm), demonstrating performance optimization of anisotropic conductivity. What is more, the mechanical strength of the piercing strength perpendicular to the GPE film after hot pressing increased by 42% compared to the solution-cast film. This work establishes a scalable processing route to break the conductivity–strength dichotomy in GPEs, offering critical insights for designing high-performance polymer electrolytes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Material Science & Engineering, Nanjing Tech University, Nanjing 210009, China.
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing 210009, China.
ORCID-Profile: Zhifan Fang
Förderung
- Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
Zitieren
APA
Fang, Z., Zhang, H., & Chen, S. (2025). Anisotropic Conductivity and Mechanical Strength Enhancements in Gel Polymer Electrolyte Films by Hot Pressing. Materials, 18(8), 1751. https://doi.org/10.3390/ma18081751
Vancouver
Fang Z, Zhang H, Chen S. Anisotropic Conductivity and Mechanical Strength Enhancements in Gel Polymer Electrolyte Films by Hot Pressing. Materials. 2025;18(8):1751. doi:10.3390/ma18081751
BibTeX
@article{Fang2025,
author = {Fang, Zhifan and Zhang, Hao and Chen, Shuangjun},
title = {Anisotropic Conductivity and Mechanical Strength Enhancements in Gel Polymer Electrolyte Films by Hot Pressing},
journal = {Materials},
year = {2025},
volume = {18},
number = {8},
pages = {1751},
doi = {10.3390/ma18081751}
}
EUVIMED