Hot‐Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All‐Solid‐State Sodium Metal Batteries
Small Methods · 03.03.2024
DOI: 10.1002/smtd.202301579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 03.03.2024. Verfasst von Lanqing Zhao und 10 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Nonferrous Vacuum Metallurgy of Yunnan Province, Kunming University of Science and Technology, Kunming, 650093, China. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Yunnan Province, Applied Basic Research Programs of Yunnan Provincial Science and Technology Department.
Abstract (Originalsprache)
Poly(ethylene oxide) (PEO)‐based solid polymer electrolytes (SPEs) are widely utilized in all‐solid‐state sodium metal batteries (ASSSMBs) due to their excellent flexibility and safety. However, poor ionic conductivity and mechanical strength limit its development. In this work, an emerging solvent‐free hot‐pressing method is used to prepare mechanically robust PEO‐based SPE, while sodium superionic conductors Na 3 Zr 2 Si 2 PO 12 (NZSP) and NaClO 4 are introduced to improve ionic conductivity. The as‐prepared electrolyte exhibits a high ionic conductivity of 4.42 × 10 −4 S cm −1 and a suitable electrochemical stability window (4.5 V vs Na/Na + ). Furthermore, the SPE enables intimate contact with the electrode. The Na||Na 3 V 2 (PO 4 ) 3 @C ASSSMB delivers a high‐capacity retention of 97.1% after 100 cycles at 0.5 C and 60 °C, and exhibits excellent Coulombic efficiency (CE) (close to 100%). The ASSSMB with the 20 µm thick electrolyte also demonstrates excellent cyclic stability. This study provides a promising strategy for designing stable polymer‐ceramic composite electrolyte membranes through hot‐pressing to realize high‐energy‐density sodium metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory for Nonferrous Vacuum Metallurgy of Yunnan Province, Kunming University of Science and Technology, Kunming, 650093, China.
- National Engineering Research Center of Vacuum Metallurgy, Kunming University of Science and Technology, Kunming, 650093, China.
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, 650093, China.
- School of Chemical Engineering, North China University of Science and Technology, Tangshan, 063009, China.
- Fachgebiet Angewandte Nanophysik, InstitutfürPhysik & IMNMacroNano, Technische Universität Ilmenau, 98693, Ilmenau, Germany.
ORCID-Profile: Feng Liang
Förderung
- National Natural Science Foundation of China
- Key Research and Development Program of Yunnan Province
- Applied Basic Research Programs of Yunnan Provincial Science and Technology Department
- Yunnan Industrial Innovative Talents Program for "Xingdian Talent Support Plan"
- Yunnan Program for Introducing Foreign Talents
- Yunnan Major Scientific and Technological Projects
Zitieren
APA
Zhao, L., Hou, M., Ren, K., Yang, D., Li, F., Yang, X., Zhou, Y., Zhang, D., Liu, S., Lei, Y., & Liang, F. (2024). Hot‐Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All‐Solid‐State Sodium Metal Batteries. Small Methods. https://doi.org/10.1002/smtd.202301579
Vancouver
Zhao L, Hou M, Ren K, Yang D, Li F, Yang X, et al. Hot‐Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All‐Solid‐State Sodium Metal Batteries. Small Methods. 2024. doi:10.1002/smtd.202301579
BibTeX
@article{Zhao2024,
author = {Zhao, Lanqing and Hou, Minjie and Ren, Kun and Yang, Dongrong and Li, Fupeng and Yang, Xiecheng and Zhou, Yingjie and Zhang, Da and Liu, Shan and Lei, Yong and Liang, Feng},
title = {Hot‐Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All‐Solid‐State Sodium Metal Batteries},
journal = {Small Methods},
year = {2024},
doi = {10.1002/smtd.202301579}
}
EUVIMED