EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative Short Process of Preparation and Nitriding of Porous 316L Stainless Steel

Chunheng Liu, Fang Zhang iD, Lei Zhang, Jun Peng, Hongtao Chang, Yongbin Wang

Materials · 30.03.2025 · 18 (7) · 1564

DOI: 10.3390/ma18071564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.03.2025. Verfasst von Chunheng Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical Future Technology, Inner Mongolia University of Science and Technology, Baotou 014010, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2023 Basic Research Foundation Project for Universities in the Inner Mongolia Autonomous Region, Natural Science Foundation of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous 316L stainless steel has a low density and high specific surface area, and is easy to process due to the large number of pores within it, making it ideal for applications such as piping in the chemical and food industries, as a medical tool, or as a fuel cell pole plate material. Nitriding treatment can further improve the hardness and strength of porous stainless steel. In this paper, a method combining vacuum sintering and nitriding treatment was proposed, i.e., 316L stainless steel powder was used as the raw material, and porous 316L was sintered in a vacuum tube furnace, in which the porous stainless steel was nitrided with nitrogen gas during the cooling process. In the research process, thermodynamic calculation and differential thermal analysis were used to determine the optimum nitriding temperature range of 700 °C~850 °C and nitriding pressure of 0.4 MPa~0.8 MPa. With the increase in nitriding temperature and pressure, the nitrogen content in the sample increased, and the nitrogen content of porous 316L stainless steel after nitriding was 0.03%~0.86%. The results show that nitrogen exists exclusively in solid solution at nitriding temperatures of 700 °C and 750 °C. At nitriding temperatures of 800 °C and 850 °C, the nitrogen existed in both solid solution and chromium nitride (CrN), and the Vickers hardness at 0.08 MPa and 850 °C was 135 HV, which was 2.82 times higher than that before nitriding. The compressive strength of the specimens was maximum at a nitriding pressure of 0.04 MPa and 850 °C. The corrosion resistance of the specimens is optimized when the nitriding pressure is 0.04 MPa and the temperature is 800 °C.

Schlagwörter

Stichwörter der Autor:innen

gas nitridingmechanical propertiesporous 316L stainless steelshort processvacuum sintering

Autor:innen und Institutionen

  • School of Metallurgical Future Technology, Inner Mongolia University of Science and Technology, Baotou 014010, China.
  • School of Rare Earth Industry, Inner Mongolia University of Science and Technology, Baotou 014010, China.
  • Key Laboratory of Green Extraction & Efficient Utilization of Light Rare-Earth Resources, Inner Mongolia University of Science and Technology, Ministry of Education, Baotou 014010, China.
  • Tenth Company of Inner Mongolia First Machinery Group Co., Ltd., Baotou 014030, China.

ORCID-Profile: Fang Zhang

Förderung

  • 2023 Basic Research Foundation Project for Universities in the Inner Mongolia Autonomous Region
  • Natural Science Foundation of China
  • National Key R&D Program of China
  • Major Science and Technology Project of Inner Mongolia Autonomous Region

Zitieren

APA

Liu, C., Zhang, F., Zhang, L., Peng, J., Chang, H., & Wang, Y. (2025). Innovative Short Process of Preparation and Nitriding of Porous 316L Stainless Steel. Materials, 18(7), 1564. https://doi.org/10.3390/ma18071564

Vancouver

Liu C, Zhang F, Zhang L, Peng J, Chang H, Wang Y. Innovative Short Process of Preparation and Nitriding of Porous 316L Stainless Steel. Materials. 2025;18(7):1564. doi:10.3390/ma18071564

BibTeX
@article{Liu2025,
  author = {Liu, Chunheng and Zhang, Fang and Zhang, Lei and Peng, Jun and Chang, Hongtao and Wang, Yongbin},
  title = {Innovative Short Process of Preparation and Nitriding of Porous 316L Stainless Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {7},
  pages = {1564},
  doi = {10.3390/ma18071564}
}
Kostenlos starten →