EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction and Wear of Tungsten Carbide Dies in the Dry Drawing of Steel Wire

Maciej Suliga iD, Piotr Szota iD, Joanna Kulasa, Anna Brudny iD, Marek Burdek iD

Materials · 22.03.2025 · 18 (7) · 1409

DOI: 10.3390/ma18071409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2025. Verfasst von Maciej Suliga und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents an analysis of the wear of the surface layer of drawing dies after the steel wire drawing process. It was shown that the working surface of the drawing die is characterized by high roughness combined with the occurrence of numerous scratches and blurs. As a result of high pressures in the deformation zone, premature wear of drawing dies combined with mechanical damage and the sticking of steel on the drawing surfaces can occur during the industrial drawing process. The finite element method analysis showed a significant relationship between the friction coefficient and the rate of drawing die wear. The varying distribution of stresses in the drawing die during the drawing process can contribute to mechanical damage. Longitudinal tensile stresses at the wire’s entrance to the drawing die increase the risk of circumferential cracking of drawing dies.

Schlagwörter

Stichwörter der Autor:innen

FEMdiedie surfacefracturefrictionsteelwearwire drawing

Autor:innen und Institutionen

  • Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland.
  • Łukasiewicz Research Network-Institute of Non-Ferrous Metals, Sowińskiego 5, 44-100 Gliwice, Poland.
  • Łukasiewicz Research Network-Upper Silesian Institute of Technology, Miarki 12-14, 44-100 Gliwice, Poland.

ORCID-Profile: Maciej Suliga, Piotr Szota, Anna Brudny, Marek Burdek

Zitieren

APA

Suliga, M., Szota, P., Kulasa, J., Brudny, A., & Burdek, M. (2025). Friction and Wear of Tungsten Carbide Dies in the Dry Drawing of Steel Wire. Materials, 18(7), 1409. https://doi.org/10.3390/ma18071409

Vancouver

Suliga M, Szota P, Kulasa J, Brudny A, Burdek M. Friction and Wear of Tungsten Carbide Dies in the Dry Drawing of Steel Wire. Materials. 2025;18(7):1409. doi:10.3390/ma18071409

BibTeX
@article{Suliga2025,
  author = {Suliga, Maciej and Szota, Piotr and Kulasa, Joanna and Brudny, Anna and Burdek, Marek},
  title = {Friction and Wear of Tungsten Carbide Dies in the Dry Drawing of Steel Wire},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {7},
  pages = {1409},
  doi = {10.3390/ma18071409}
}
Kostenlos starten →